https://www.yotatech.com/forums/f116/sr5-gauge-cluster-swap-how-pics-179106/ [MEDIA]
check this out https://www.yotatech.com/forums/f116/sr5-gauge-cluster-swap-how-pics-179106/ [MEDIA]
wheels first.
i would keep looking for the sr5.. and besides the oil pressure sending unit you will have to run a tach wire from the ignition coil... its no...
awesome
happen to know the part number for those??
Gabriel "Front Spring Assist Shock" part number #34051. The first pic should be a pic of the box with the label.
if you haven't already I would swap the entire cluster for an sr5 cluster.
i know this is old but is middle leaf removal the same as mono leaf?? my bigger question is do the drop leafs maintain spring rate?
Got the rears done today. fits good everything clears
yeah the rears are easy to come by because Gabriel has an application for 2wd Toyota pick ups but nothing for the front. But these for a 92 Sonoma...
92 GMC RWD Sonoma Gabriel "Load Carrier" shocks. No modification needed. I know its not super cool adjustable racing coilover struts but I am a...
I think you have low compression should be between 142psi -171psi with no more than 14psi variance between all four. BUT if you can get it going...
maybe you just need to tune the carburetor a bit. you can always test your battery with a volt meter to see if your juice is good. Id say if...
replace your drive belts too. make sure they got some good tension.
If I were you I would just save some money and get new hoses and radiator if possible. Then I would do a full coolant flush with the new radiator...
any white smoke through the exhaust???
The 7mgte tho... can easily mount to his stock w-series transmission if he takes the bell housing from a non turbo 7m along with the clutch fork,...
If you are looking for power I'd go engine swap and 7m would be most feasible. 1jz 2jz and 1uz are also cool options but probably require more money.
Separate names with a comma.
