Yeah. It's just a factor of finding the right 5x114.3 pattern rotor and the pacer size needed to center the caliper. I'm not too worried about the...
I'm glad I looked at this thread. Found a set of brackets on ebay for the v6 brake conversion on the rear. Will figure out the best rotor / brake...
1. Can I use my stock 5 speed tranny with the 1uz if I get adapters? If so, what adapters do I need? You can use your stock 5 speed with adapters...
Sorry. Sold them long ago
I removed the toyota rotor from the hub and then had the hub machined down to fit inside the back of the Mazda rotor. Now it's a floating rotor...
Looks good. If you don't already know, the transgo shift kit for the Lexus/toyota trans makes a big difference in shift quality. Really firms the...
The flat spot on the face of the glove box is a cool place to put gauges. [IMG] If you're lucky, you may find the inclimeter assembly from a...
Looks good but make sure you tie the latch in with a strap from it to the bottom of the core support just like the factory did. The lift generated...
Welding is the best skill to learn when building cars. It will help you become more creative when solving problems and also save you so much money...
I see you don't have any shims on the upper control arm mount. What your camber like? I had to add a few shims to increase the negative camber so...
I had the opposite issue. The uppers were easy for me. It was the lower control arm bushing install that gave me the most trouble.
Nice! Wish the paint on my truck looked that good. The starions look good. BTW, that's a good sidewall height on your tires. Don't go any thinner...
BTW, The 3uz and 2uz's have smaller coil packs. They may come in handy if you need the room.
Here's a pic I stole from Lowtides build. [IMG] There's a cable and pulley assembly on the firewall right behind the head. I removed that and...
Good to know the dropzone mounts work. Looking at the clearance between the valve cover and brake booster, You must have the sc400 oilpan.
I only have an inch clearance between the head and firewall. Had to push it back that far so the sc400 oil pan would clear the drag link. The...
Yep. Still running the same setup. I found those cross drilled mov rotors on eBay.
Thanks man. Have you started your swap yet? Further work will slow down to a crawl on the truck. Gonna focus on final cleanup on my supra. Just...
the passport valance is bolted to the toyota bumper
Its from a honda passport
Separate names with a comma.
