https://www.facebook.com/photo.php?v=10151778242115686&l=1447713177624489016 That's my lo and hi beams. The FX-R's and Morimoto minis are...
Or true, proper headlight upgrades in terms of getting projectors so you can deliver HID lighting correctly. [img] [img] [img] [img]...
Plastidip is rubber paint, essentially. Keep your cans warm. Clean surface to paint on. Don't sand a single thing, but I do have to say that...
I'd find the correct w5x manual mount and truck crossmember manual mount too.
I have a SC300 early W58 as far as I know. I'm using a W4x bellhousing (didn't know it was a Wxx 4spd bellhousing but it lined up just fine)....
Mount it lower where the suspension is at, not the body.
I'd build some type of "scoop" in front of the intercooler that draws air from the bottom edge of the front valance, and maybe some from the...
275/35/18 + 3.42's + W58 from SC300 = 2000rpm's @ 60mph, 2500RPM's @ 70mph, 3000RPM's @80mph, as far as I've calculated and actually driven....
Each downshift requires a throttle blip of a certain amount to bring the RPM's high enough to get into that "perfect window". Going from 2nd to...
What's the maintanence history of the truck? Oil, timing chain, valve adjustment, filters, sensors (esp o2), and more...
Bring this dead horse back up, since I'll be upgrading my wiring soon. Let me get this straight, please confirm if I'm correct or not. 1....
Any air leaks between the VAFM and throttle body, to include no vacuum leaks? I'm positive your TPS adjustment is also correct, how about the...
[IMG] [IMG] [img]
14/17/19mm, either one of those lol. You might be right, I think I used a deep socket 19mm. I just know I used a 1/2" drive and tons of PB Blaster.
never had that issue with a magnaflow. Stock mani > front pipe > gutted cat > 2" > 2.25" > 2.5" magnaflow offset inlet, offset outlet and it exits...
Magnaflow.
It should work just fine.
It's looking good, man.
interesting... I can manage to heel toe downshift into first... guess I won't be doing that anymore!
my front fenders are rolled and slightly massaged out for the 18x10's sticking out 1.25" with 275's. But if I threw totally untouched fenders on...
Separate names with a comma.
