Here are some pics of the window situation. The first is with the gaping hole. Someone cut onto the panel and then probably fitted a speaker...
I power washed the 20 R engine. Here's what I did and what happened. (Before and after pics attached) First I got the engine hot. I had to...
Te door window on the driver's side of the SR5 has come out of the retractor rail. So the rail is still on he retractor, but the pane of glass...
I'll wash out the engine compartment, and since I have out the power washer, invest five minutes more and do the undercarriage. A mechanic once...
Once again, I did a little from everyone. And it worked! I checked 12 volts at fuse box: 12 volts. Checked 12 volts at female three pin: 12...
Do you still want this info? I'll look. Where is the number located? ( Picture helps ...)
Request for advice: What's he best way to power wash an engine? It's a 20 R engine, though I doubt that is significant. This engine had a...
Aaron, WT, 3sp...Everyone here at Toyotaminis: WOW! The replies and sharing of knowledge is EXACTLY why I come here and post: to ask, to...
Aaron, WT, and All - Thank for the insights you have shared. I'll give those a try. My gut instinct says it's a "tooth" off on the distributor...
Tail pipe. But only once or twice. I've pulled the distributor about six times to reset it. Checked the wires and their order the same....
Just thought of something I was once told to do. What are your thoughts on this method... A) Wait until dark. B) Pull all the wires off the...
I'm reinstalling my distributor on a 20 r engine. What am I doing wrong???? ( Engine turns over but won't ignite...occasional backfire ) A)...
Wow and whoa! To plate or not to plate, that is the question This mush discourse and debate on an EGR valve, all of it quite good. The...
Been a bit wonky in the head. Good friend died Wednesday night. ( Yes, life can change in a twinkling of an eye....) Went to the junkyard...
I was told that a clogged EGR valve will cause an engine to run hotter, causing possible damage to the engine. Hence, by removing an EGR the...
I replaced the EGR ( Emission Gas Recirculation ) valve with a homemade plate. Was told the EGR is no loner needed as the 75 SR5 does not need to...
WT and Tyrp26 and everyone else, thank you! You shared your knowledge and insights. That teaches me. This saves me frustration! Thank...
20R - Rocker Arm Valves Adjustment - Pics _ Part Two 6) With the engine now set at TDCE, the the next set of valves were adjusted: Intake to...
This will be the second time I've written this. The first potsing crashed, so if there is a double post, mea culpa. Background: My 75 SR5 blew...
20 R engine : Which is the correct location of the CRANK Pulley timing mark (divit)? I asked one technician at a Toyota dealership, and he said...
Separate names with a comma.
