Added a light bar and some Hella headlights. [IMG] [IMG]
Here is a pic: [IMG]
Just a heads up for anyone in the Orlando area, I found a Conquest that still had rims at the local junk yard but I have no money. The guy at the...
Got the engine in and it started right up- no issues. Took it out for the first fishing trip last week and heading out again today. Now to start...
Got a call from the shop and they have to weld a couple of water passages and the head will need a shim. Last person used two headgaskets and a...
So I guess the last person installed on backwards.Will I will need to install it the same way I took it out or can I turn it around?
Dropped off the head at National Cylinder Head Exchange- $198 and he said it would be as good as new and all cleaned up. When I took out the...
I didn't think I removed it from something- trying to everything together. I wish the gasket kit came with ID's, not sure what some of them are...
Got the gasket set Friday and starting to work on the engine. Does the heater bypass tube mount to anything? It bolts to the back of the water...
Pulled the engine/trans yesterday without any issues and started the teardown. So far I also need a new flywheel and clutch kit but no other...
Order a full gasket set, timing chain kit, oil pump, and new head bolts. Hope I don't run into any issues, first time working on a 22RE- done...
I't been awhile but my wife was driving the truck and the temp gauge spiked, started smoking, and engine died. Long story short, the small hose...
Got the two bushings from the Toyota dealer for less than 8 bucks total. Took less than an hour to remove and install- very easy to do. And yes,...
Installed new idler arm bushings: old was were gone (pile next to shaft) [IMG]
Replaced or should I say installed idle arm bushing today- the pile of crap next to the shaft is all that was left from the old ones :brickknock:...
pinstripe
Glad you liked the Supra AFM :waytogo: I see you left it the same color. Now just do a battery flip to decrease the radiator heat on the intake.
My stock radiator is starting to spring some leaks and wanted to know how the aftermarket radiators that are plastic/composite on the top and...
Go to 3tcgarage.com- one of the best old school corolla sites around. Guy parting a nice wagon now: http://3tcgarage.com/viewtopic.php?f=20&t=7619
Pulled some stuff from my Corolla that getting sold tomorrow and put it on the truck. Replaced the crappy 6x9's with some rockford fosgate's (hole...
Separate names with a comma.
