Here i am almost 2 years later. Havent been here in a while but I'm sure there is plenty of people around still. I just finished the motor, im...
Just realized you have a Mitsubishi to start with....sorry...:lol:
I've done it. I have a 1992 pickup, and I bought an entire front clip from a 1995 4Runner, from the firewall forward. I did this solely because I...
And quite wasting your time pulling the front fenders. Find a 4Runner and take the front fenders...on the 2wd trucks it makes it pretty flared...
Dont remove any leafs. Go to AutoZoner and spend $39 on a lowering kit. It comes with cheapy aluminum drop blocks for the rear and also the new u...
I got the swap finished up yesterday and took it for a drive. The 3.73 gears really made the power more usable in the first 2 gears. The limited...
Bay Area, northern California. Yeah
Got a drift day on the 24th, skid pad. If I get my drive shaft and brake line in time I will tow the truck up drift it ! Hope fully, eh !
I built the harness from scratch using hundreds of feet of wire and the 25 pin BMW connectors. It was a puzzle to match the Toyota schematics to...
The truck is a 92, but the start of the project I cut the front clip back to the firewall and installed a 95 4runner front end on. I wanted to run...
You wouldnt believe it but its real. The truck has since been secured and locked up heavily, but there was a 6 month period it sat in my frony...
I basically gave away my supercharged 22re for $1800 to help fund the start of the project. Its hard t explain why I had to, but ill try....
Thanks. When I get on my computer later I will post up some pictures. There are also pictures throughout the random other threads I have started....
These are the mounts I used. They are made by Northwest Off Road and are high quality. These mounts allow you to literally bolt a SBF right in....
Yeah. You need a rear sump pan but the stock ones that came rear sump fits so perfectly you would think toyota designed it to be that way. Can...
The truck also has a T5 and 8.8" 3.73LS. Literally to fit the 302 in the truck you need a $200 set of specific motor mounts and a $60 oil filter...
Not to bug you, but would you mind showing some pictures of your rear setup? If possible, the notch. Im also curious to see the whole truck !
The truck is caged and therefore removal of the bed is limited unless I cut the rear roll bars, which is something I would like to stay away from....
Thats what I am confused about. There IS NO suspension in the rear, even when everything is hooked up. Its solid, 100%, no travel; the pumpkin is...
Its a track truck with a small block Ford and 5 speed. I wanted the Limited Slip and disk brakes too.
Separate names with a comma.
