Trust me I know gary lol.... The 85 nearly put me in a ditch when the same part on it broke off! Yep doing this one the right way this time and so...
That's why I wanted to rebuild/replace everything before I put it on the road because of all these same issues from my 85 RIP... I bought the...
Everything finally came in to redo my front end next! All new steering parts except the gear box, new drop spindles, bushings, and everything else...
Bought the rest of the front end parts last night. Hoping the fuel nozzle will be done by 12 so I can put the tank back in the truck and then the...
Got the springs back on the housing and hoping they are straight lol! I guess I will see once it's back on the truck if they're off or not, but...
Yeah I'm going to get the eye/rod setup as that's what is on the truck *well ball joint, but whatever lol*.
Well managed to find a bolt that would work for the center pin on the leaf springs *original is like a 7/16 X 1.5" and I used a 3/8" X 1.5" cap...
88 pickup 2wd carb setup. What does the aftermarket steering damper look like? Is it two eyes, eye and a rod, or two rods? I'm looking at rock...
Cool dude thanks.
It's actually two on the exhaust isn't it? one per bolt or something? Any links to the one for the intake?
Lol sorry 88 22r... I now I need the egr block plate, but not sure about all the others.
Any special trim stuff I need to know when I go order the tacoma rubber piece? Also will it work on the 84-88 pickups? I don't see why it...
Anyone know all of the plates that have to be bought/done to for the full desmog process?
Got one of the leaf packs back together, but broke the center holding bolt on the other so going to pull this one back apart and use new bolts for...
Got the new bushings in the leafs and started putting them together although I'm pretty sure I did the first one wrong lol! Putting a level across...
What does the sleeve press look like? I have a 12 ton shop press, but not what you're talking about I don't think.
Recoat it in what? I think I may have found a replacement for my filler neck *brand new*, but waiting to see if it works out first.
Finished cleaning/sanding the housing and got a coat of black on it. Also: Anyone ever replace their filler neck and have any tips as to where to...
Got the axles tightened up and started sanding. Back to the store for some sanding stuff that will get into the tight spots better! Hoping to wash...
Well on mine once I get the flange spinning both axles spin the same direction. I don't know if anything was ever done to this rear end, but...
Separate names with a comma.
