I'm pretty sure the 2wd and 4x4 boxes are different.
Steering box needs to be 89-95 I believe. I pulled a power box off of an 85 and it would not fit, mounting holes were way off. Everything...
It's a fairly easy swap. You will need the steering box, pressure and return lines, the cooler loop, pump and bracket, reservoir, and the crank...
Check out Dcups' Runner in the build section. He did a QA1 coilover suspension, looks clean and simple....
Take it and part it out. Don't even think about swapping it in, its not worth the time and $ your going to spend getting it going. It does have...
And yes, of course you can change stock twins to single. Pretty much all bolt on parts. SupraMania - Articles and Features , Supraforums.com...
The return lines are just a little bit different, and wouldn't be too hard to redo if you cant easily find the correct ones. Once you go single,...
Ok, before this rumor gets rolling again... Non-turbo VVTi rods ARE lighter and weaker. TURBO rods are the same - both VVTi and non VVTi....
Im sure you could run a 255, running a 15x10 would be the more iffy part, just depends on how low you are. I currently run 275/30s on 19x9.5 35mm...
I tried acetone, but didnt like the way it was working. What I found worked best was just some 120grit by hand to start, and then once the white...
X 3 !! I hope you get your buddy back for this one!
Here's some crappy ones. The blue led lighting is still a work in progress. I removed the green tint from behind the gauge faces, and once you...
I've always referred to it as a clamshell or steering column cover. Someone on here probably has an extra one. What color and does the truck...
I scraped the paint off mine with a razor and then wetsanded where the paint was with 1500 to give it a frost. I have blue LEDs in my gauge kit...
It's finally coming back together. With the exception of the sub box and the stacker console its almost back to original condition.
Woohoo!!!
Thanks, glad to have it back. I actually still have the 19's that are in all my pics. I had bought some other TSW 19s off of CL and only had them...
Hood I built - scoop is from a Subaru Legacy [IMG] [IMG]
OK, I've been avoiding the truck and the forums for a while, but I'm back on here and also back to fixing the truck. I've managed to almost get...
Just had liability, so no $ coming my way. I did not have an antitheft of any sort, but its not leaving my garage again until it does!
Separate names with a comma.
