Check the VIN #. It will confirm the model, trim, paint, etc.
I run side drafts but my throttle cable is on the end. If you do not have all of the parts for your center pull system check the various Webber...
Check your fuses and circuit breaker first. Next, check the plug in wiring connecters. If the fuses are okay you most likely have corrosion or a...
Saw reproduction latches available on eBay. They were listed on eBay motors under 1979-1983 Toyota pickup truck search.
They make remote oil coolers with their own electric fans for people that want to hide them. Many Street Rodders use them. I do not know what they...
I run an Earls oil cooler on my 1983 Toyota 4x4 with twin Weber sidedrafts. I used AN 12 braided SS lines, a System 1 oil filter, and a Morroso...
There is a guy on the yotatech forum who should have what your looking for. He is located in Elizabethtown, PA and he usually posts his threads...
I built my own using a Hoffman fiberglass electrical enclosure from an electrical supply house, a gauge pod I bought at a flea market and a...
The power output of an 18RG-U depends on what you want to do with it. An off-road racing motor is done different then a drag race, circle track or...
The 18RG-U engine bolts directly into 1979-1983 Toyota trucks using factory parts. I used to race my truck and had the TRD prepped 18RG-U series...
I am in Pennslvania and go to cruise nights and car shows in PA, NJ, DE and MD. I have never seen a Toyota only or mini truck event in any of...
Look on ebay in Toyota trucks. I have seen some 1980's aftermarket stuff showing up over the last couple of weeks. I purchased a set of factory...
Real nice, I like shiny stuff too.
Set your rev limiter at 6.5K and you will be okay if running a 4 cylinder. If running a 6 cylinder set it for 5.5-6.0K. If you rev your truck out...
Here is mine.
I have seen long beds with 2-3-4 side hooks; do not know why. A Japanese bed, at least 1982 & 1983 trucks, has no separate panels on the bed...
I forgot and this is extremely important DO NOT EXCEED 1 PSI FUEL PRESSURE AT THE CARBS other wise your carbs will flood.
Change your air jet to 185, stay with current idle jet, choke size should be 34 and sinc. carbs. Set timing at 30-32 degrees total with timing all...
What type of graphics and color would look good on the lower sides of my truck. The truck is painted Wild Strawberry Pearl Metallic (Medium-Dark Red)
Separate names with a comma.
