I have a 1983 Toyota 4x4 and I run a 15" Ford 2 speed fan on my stock steel fan shroud.
Find a factory service manual. It has all the engine data with almost step by step instructions.
I doubt very much if you will find wire to match the Toyota color code unless you are an OEM and can purchase large quantities. I wire my friends...
Here is mine.
Slacker, don't worry about the trophies just enjoy the compliments. Last year my truck was selected to exhibit in an indoor show with a limit of...
You should set your timing at 30-32 degrees total- all in at about 2000-2200 RPM. You will need a timing light that is capable of doing a total...
The brake and battery lights both come on due to a low voltage problem. Check your voltage regulator, charge light relay circuit and ground...
First make sure that you have fuel pressure at 1-1 1/2 PSI at the carbs. Back off the throttle adjusting screws on both carbs until they do not...
I have Weber DCOE 45 Carbs on a 20R Head/ 22R Motor. What do you want to know?
You do not need to use the chokes on Weber side drafts. Just pump the throttle about 3 times and your truck should start.
First off, Webers are designed to run 1-1.5 PSI period. Anything above 1.5 PSI and the carbs will flood (even with spring loaded seats). You...
List your Crane Model # and the color of all the original wires connected to the HI-6 ignition unit and the color of the wires coming from your...
Go to the Crane WEB site and download the instruction manual for your specific HI-6 unit. If you are using a stock distributer, you do not use the...
Separate names with a comma.