Well one vacume line would be less of a headache! I was gonna try to keep the stock carb as long a possible, but looks like its going in the box...
The problem still accuring, flat spot in the same rpm range, even after I put the vacume switch back. And all this vacume line are getting...
A 38 weber will but only if you got a heavy foot
So I reinstalled one of the vacume switches and rerouted one of the vacume lines that was missing since I got the truck. It still stumbles in the...
WOT there no problems, only between 2000 and 2500 rpms when holding steady throttle or decelerating part throttle does it start to sputter.
Mostly around 2000 to 2200 rpms steady speed, when accelerating no problems
Yeah stock carb
took off everything, do I have to put these back now?? [IMG]
The tank vent from the canister is vent to the atmosphere and both switches were removed
Well cant find anything wrong with the lines. All the lines that were plugged into all that evap stuff got capped after removal
My motor is carb(22r), and I removed everything on the passengerside of the bay except the battery, fuse box, amd starter relay. And I plugged the...
So I decided to clean up my engine bay by removing the charcoal canister and the VSV valve/solenoid. I didn't notice and problems at first, but...
Are those 4runner side mirrors?
Any grille from that gen will work.
Thats a score!!! Wish I could find a deal like this. And yes you might need to run at least 1" hubcentric spacers if the hub bore on the rim is to...
I got a 8" 5lug sitting in my backyard with 3:73 in it. Welded it tho, dont know if I wanna put it in now...:shrug:
Changed mine. @whoopyojaw
Also check out @808whips and @hawaiiillestwhips lots of sick toyz from hawaii
@tkalani_ not slammed any more, still dropped tho.
Might wanna look into a suspension lift. If its a 2wd you could get an add-a-leaf and a lift shackle for the rear. The front you can either do...
Separate names with a comma.
