and one stud me!!!! Ha!
[IMG] Hey po po!! [IMG] The wheels look like Eagle Alloys. [IMG] Its not to high or low but just right for a sports truck. Not the...
Na the frame is from the rv, the bed and rear springs need work.
[IMG] I took this pic just south of santa barbara, out of all the toys ive seen this looks just right, the ride height, wheels, tires. I've got...
[IMG] So is this a long bed or what? The guy said he made it out of a dolphin rv, and 2 long beds and the back of a cab out a junkyard.
Yesterday I smoged my truck and failed, the only thing I failed was the new evap system, they pressurize your gas tank and pinch off the charcol...
Collins the kid is freakin me out already!!
Look for a vacuum leak, spray carb clean safely all over your motor, if the idle raises over 200 rpm you have a leak, check gasket areas, vacuum...
The best way to get to metal without removing any metal and causing you more body work is a chemstrip, quick, easy, and super messy. Remember...
hey is it a straight axle?
Bitchin runner looks like it will be a fun project.
+10 should get you close to the fender without rubbing.
So how high does it sit off the ground?
I know its not what you're looking for but I got a 4speed w/ 390's it runs 3300 rpm at 60 mph in 4th obviously. I can pin the speedo straight down...
The 22rte head is called an open chamber head, the 22r-e is called a closed chamber head.:D
yeah pressure on your clutch. If you are in the salvage yard you might as well pick up 4x4 center section as well.
Hey guys does anybody have an extra set of leaf spring plates for 84-88 2wd, I picked a pair up from the junkyard and got boned, no return bs,...
Well if you put a 5speed in your truck and retain the 307 gear ratio you will probably have more pressure put on your clutch, and crank,...
The 5 speed is direct replacement for the 4 speed, the 4 speed isn,t any stronger than the 5 speed to the fact that they share the same main shaft...
or gear it, buy a detroit, bolt in downey offroads rear disc kit for toyota trucks and never think about it again, in a perfect world. i dont...
Separate names with a comma.
