Try spraying the carb in and out, linkage, and down the speedo cable with carb clean.
Replied to email.
Hey Ashton if you set up the shipping and wire the money no prob. Rod let me know.:waytogo:
Yeah it is a downey kit, but it is a early kit when they didn't compensate the bj plate for correct geometry for cranked torsins at ride height....
Ok Im throwing in the towel and Im done $2500. and its yours, and it comes with a 5speed not installed. I cant work on it and I'm going nuts and...
dont leave the headrests off if you get rearended your head will go through the back window.:waytogo:
The 4 speed 2wd 8" third member is not the same as a 4wd's. The 2wd came with 307 gears so the carrier housing had to be offset because of the...
Go to a automotive store and bring the factory bolt, get the correct helicoil kit, by the correct drill bit and tap required if not supplied,...
Replace it, less time and money.
I built my motor for far less than LC's prices. I bought my parts directly from the manufactures and wholesalers, and I had my machine shop charge...
I had a bad experiance with LC, I ordered a cam gear, when I received it two of the teeth on the gear were bent and had concrete dust on the teeth...
The easiest way to check for vacuum leaks is to spray the motor with brake clean, if the rpms raise you have a leak, isolate the area and thats...
The 4age is most likely to move a hilux the same as the 22r, reason being is what the 4a lacks in tork the 22r makes up and what the 22r lacks in...
And No you dont need an adapter, You just use I think its the pink to tie into your tach pluse wire.
MSD blaster 2 coil, 6A that replaced factory ingnitor you dont need it, MSD super conductor 8.5 wires, E3 Plugs, Indexing washers. Only thing I...
I second Nook's statement, every fuel system I've plumbed have had the reg before the carb. The port that opens in the reg when it's in open flow...
Make sure that the paints or clears that you mix are made by the same company and the same dates. Different companies will use different thiners...
The only aftermarket suspension parts I would use would be Spicer or Moog. Tight and built to last.:waytogo:
They look like -40 or 45. They are most likely and offroad wheel like mine on my truck.
Hey sandshark you can sell the honda ----no capitol and buy my yota, way more fun than a honda, beats civcs w/ b16's and drifts what more could...
Separate names with a comma.
