Scuff the chrome well, then seal with a self-etching primer and paint.
With the help of 90DailyDriven I ordered a 35 tooth gear. Cool thing is it came with a new G clip and O ring for the sending unit. I switched them...
Those are bitchin, Robert. :waytogo:
The Supra gear had 33 teeth. My truck gear had 18 if I remember correctly. The numbers were stamped on top of the plastic gears and I counted to...
I'll take it!
Ok I got around to changing the gears in the sender. I think that is what you guys meant. Right off the senders are different, the W58 sender...
Ahhh, I see. Ok. Will do.
Ok, I'm still new to this so... Is the "driven gear" in the speedometer itself or is it in the sender, or in the tranny? Then how would I know...
Well I just did the math and I'm about 16.67% slow on my speedometer. So I need something to speed up the spin in my speedo cable. I'm going to...
I have belltech 3" drop springs on the rear of my truck. Thing is the front of my truck still looks just a tad lower. I'd say about an inch or so....
The speedo is off about 5 miles slow. Meaning if I drive the speed limit going by my gauge, I'm actually speeding by about 5 mph. I plan on...
:waytogo: I like the hidden idea better.
W58 Tranny Install After doing a ton of research and getting a lot of very helpful tips from WhiteTrash and other helpful members of this site, I...
About the tires The tires I'm running are 225/40 R18.
Thanks WT, for all your assistance. I just took it for a test drive and it works great! I still have to put the boot on there and double check the...
An old school trick to welding thin metal along with tacking and jumping around was to use a air hose blower to cool the metal down after you weld...
Tranny is in, well most of the way at least. Still gotta tighten bolts and rework the rear mount. Question about the speedo sender. Should I...
Damn, nice pics!
So you mean remove the shifter base and trim the shifter hole back toward the rear of the truck about an inch?
Yeah, got it out. So there are ten bolts and one nut. I didn't see that sucker until I got the ol' flashlight out and looked in the engine bay....
Separate names with a comma.
