...junk yard
t100 axles are much wider then pickup axles and will push your tires way out side the rear fenders.
have you checked out the booster?
31x10.50 4:88 gears Sucks on the freeway. Almost 4k rpms at 70mph but It can get up and go pretty good for a 22re.
4x4 rear gears can only be used if you have the 8'' rear axle. Most 2wds came with the 7.5'' axle though. I believe if your truck came with a 4spd...
:lol: Sorry, its just not going to happen. The power gained by dollar spent on these engines is just not scaled that way. Do like LilRed said and...
While its not a lowered truck, here is how I did mine when I put fiberglass bedsides on. [IMG] [IMG] [IMG] Where ever you put it, make sure...
I know its somewhere around 13" but see if you can find the difference in wheel base because that should tell you.
Well, I was close...
200k?
I dont see the problem, those push clips have held grills in fine for years. The only time they have issues is when the truck was in an accident...
[img]
Dont hold your breath. This rumor has been around for MANY years. And why would Toyota put a Cummings in the tundra, when they already make...
how much space do you need?
A "pre runner" is any vehicle used to pre run a race coarse before the start. It doesnt have to be a lifted 2wd truck, it doesnt even have to be a...
Then you either didnt do it right, didnt crank them enough, or your bars are worn out. This is for 4x4 but it is the same process...
:brickknock: The term prerunner is just as bad as the term rat rod. Both get misused and thrown out there by people who don't really know the...
None of the big companies will cut a stick? A few around here will sell a minimum 5 foot piece if i pay the $2-$4 fee to cut it.
Do a google search for steel suppliers in your area. There has to be at least one near you.
I see you're in CA also. Just an FYI, your truck will not pass smog if you convert it to a carb.
Separate names with a comma.
