Check/set the valve lash first. Also mine had a "tick" when I got it, the exhaust manifold gasket was toasted from a leaking vc gasket
Adjusted the steering box, put the new steering damper thats been laying around on. Ordered new balljoints ad tierod ends found a running RN33 for...
Lucky devil, I found one Rte up here and it was missing the Turbo and manifold . Lookin good
Fixed my pcv and finally got another pipe plug, no more ugly tstv poking out hooked to nothing. only vacuum lines are brake booster and...
Looked up axle code, F292 4.10 open carrier.
I have a daily driver this is purely a toy that only hauls my dirtbike, brush, garbage, tools and occasionally furniture. Load capacity isn't a...
[IMG] Driver ripped the mirror off, no biggie. [IMG] Nothing new here, so far so good. @SDyota: Thanks for the info, does it have to be...
Thanks for the tip, I just got done looking it over, most the play seems to be in the steering box input. But I am going to replace most of the...
You might have better luck down there finding styling parts then I did. comb the junkyards. might be some old minis out there you could scavenge.
Got it towed to the shop. Got to get it thawed out and cleaned up then its time for steering parts and maybe a new steering box if it doesn't...
Just get the belt for a non-aircon model. I believe that's how I did mine.
Jealous of your roads, parts would instantly remove themselves if I was that low here. Looks killer, how much was the steering angle affected with...
Looking good man. Like to see the little R doing work and/or in competition
I have heard of 4x guys changing accel pump jets and even running dual accel pumps. I think they only use dual pumps on synchronous carbys though.
Compare pinion flange its the only change iirc. Maybe someone more knowledgeable will chime in.
That is ridiculous low. Cant believe you got it to tuck the front tires.
looks good man, did the same work on my intake. you should have ~12.5afr wot and ~14.5 cruising. Are you using a wideband 02 for tuning?
The 8" 3rd member isn't compatible with the 7.5" housing. You could probably swap in the whole axle assy with a little fab though.
That sounds gnarly. Good luck bro.
There is also and adjustment screw on the steering box. At least on 79+ there is. jack up the front, loosen locknut and turn adjusting screw, turn...
Separate names with a comma.
