Very clean and well done, yotarip!
Whats funny is around here, you see lots of colored primers and not a whole lot of gray.
OR, get the proper size rim and tire...
Have you tried checking with a toyota dealer?
Second gen 4runners had them. Should be pretty easy to cut to fit in a pickup.
[img]
Not too bad. Edited my post above. Its been regeared for the tires.
Its a '94 2wd. Front suspension is a Total Chaos uniball kit with Fox 2.5'' coilover shocks. The rear has Deaver f67 leafs with Fox 2.0 smooth...
Probably not a lot of your guy's cup of tea but, from a 400 mile dirt trip back in Oct of last year. [img] [img] [img]
You will have 5 lug front and 6 lug rear then. What do you need to upgrade? gearing? strength? width?
Washers and longer bolts. A purpose, its suppose to help in cooling the engine bay on vehicles that have heat problems but on these trucks its...
Old thread but, looks like a short bed. Here is a long bed for comparison. Look at the distance from the back of the cab to the fuel door....
Just replace the o2 sensor. Its there for a reason.
https://www.youtube.com/watch?v=IkJqKOb0ZhY
When my head gasket blew and I went to replace it with one from engblder, it looked identical to the one that blew in under 10k of the rebuild....
Just use an OEM toyota head gasket with all the engnbldr parts
I like the design but I would use some ID tube clamps and not the plate flange. Would give it a much cleaner look. I.D. Tube Clamp Interlocking...
A panhard bar wont really do a whole lot for you with leaf springs. If you're getting side to side axle movement, check all your bushings and...
Hit up Bobby from Sadistic Iron works. He does amazing work. He isn't that close to SD though. He's up here in the high desert in Hesperia. He did...
from what i have read, 91 and before was all cable. 93-95 was electric. 92 was a mix
Separate names with a comma.
