I would not go the fabtech route, not when you can get the KBS arms. Running the fabtechs upside down probably wouldn't work too well with the...
x2 on everything WT said. Especially the upper shock mount part. If coilovers were as simple as just bolting on, lots more people would have done it.
Tacoma 2rz 2.4L or 3rz 2.7L. Both can handle boost pretty well and are a almost a direct bolt in application for a 22re. and they both would get...
^ x2 Autozone brand ATF has worked fine for me for 2 years. I made the mistake of using power steering fluid when I did the conversion and the...
When you change the line out, use ATF to refill the system, NOT power steering fluid. I never understood why that line is 4 feet long and not a...
:shrug: Fabtech makes lift kits and 99% of this site is looking for lowering and air bagging parts. On top of that Fabtech hasn't made parts for...
I wouldnt hold your breath too long for an answer Bagged_Soon is offline Last Activity: 09-17-2013 11:18 PM
DAMN! 27s and a 5:30 gear out back? That thing has to be singing at speed. Do you even have to use 1st gear? And if you're getting 11'' of travel...
Nice! You're collecting the whole set! 31'' generals on the ministock? Do they rub on the inner fender/firewall at full bump? Are you on stock...
I cant see paying $500 for a header from LCE only to have it not fit 100% correctly because of bad fab work they did. That POS would be right back...
When the truck is running, put a volt meter on the + post off the back of the alternator and the ground of the battery and see how much the alt is...
He ****ed it up...
stock 195/75-14 Section Width:7.68 in Rim Diameter:14 in Rim Width Range:5 - 7 in Overall Diameter:25.52 in Sidewall Height:5.76 in...
:shrug: Unless you plan on re engineering the front suspension setup to find a different way to have the wheel and brake rotor mount to the...
My ammo cans [IMG] [IMG] What all is kept in them. [IMG]
I dont know if that seal is available to replace or not. You might be looking at a new or good used box.
Looks like your steering box. Do you have power steering or manual?
GL4 only. GL5 made my trans real notchy and rough to shift. The redline MT90 that WT suggested is great stuff. I have it in my trans now and it...
The whole fill neck I believe is out of a miata and it has been cut, bent, turned, and welded to get the shape its in but its been years so I...
I dont know why but, I have a really hard time remembering what trans is what and what came with what vehicle. What is a 2wd 5spd. What is a 4x4...
Separate names with a comma.
