*Clutch master cylinder
Stupid... Toyota should have done this with a black tacoma, if anything.
A c notch isn't used to reinforce the rear suspension. Its a section of the frame thats cut out right above the rear axle that allows the...
american racing outlaw 1s
I like it. It's done very clean and simple and looks good, and is still functional as a truck.
Those MMW arms are just flat steel and kind of ugly. I would much rather spend the money on the KBS/cando tubular arms.
This was the bodylift kit that I had and the pic I took when I removed it to sell it. [IMG] I didnt have any issues when I did mine. The only 2...
If you want to spend the money, Redline MT90 is awesome and is what I use in my trans and what I would recommenced for synthetic. If you don't...
If doing all that, might as well check the shifter bushings and replace if needed too.
Might want to rethink the red in the front. I don't know about where you live but I know in a lot of places, red lights in the front can get you...
On the rear, doing a spring under conversion will lower it probably a little more then 3''. All said and done, you would be closer to 4'' with new...
There are MANY things that would have to be done and obstacles to overcome to get a 4x4 to even stock 2wd hight. This has been talked about on...
Thats a bad ass little truck man, I like it! They look like modified fabtech spindles. Here is a pair I had for sale last year for reference....
Post a pic of the spindles
0 or as close to it as possible If you want negative camber in the rear, do an IRS swap
I'd say thats a matter of opinion. They will never sounds like a rumbly V8 or a high strung ferrari but I think you can make just about any engine...
Are those old downey or camburg type aluminum hubs? If so, where did you find them?
They might work but most likely wont be correct. The arms might be too short or long which will screw up the geometry of the suspension or the...
lol Its call the snowball effect and it happens on almost every build I've ever seen, including mine. 550lb springs might be a little heavy. I'm...
I wouldn't necessarily buy the ones I linked to. Look around online and see if there are more options out there. Those ones were quick google...
Separate names with a comma.
