No pics = didn't happen!
That tech sounds like a retard.... Its carbureted. There shouldn't be a light. Unless you have a 22re with efi?
Check your steering stop bolt on the spindles? Maybe they need to be adjusted?
Lovin that sunroof! Nice work!
Bradthreee, what size tires are you running on your crown vics?
I know it cuts fuel to the idle circuit, but when it would intermittently go out will driving it would bog and buck, and die if I stopped....
Check the anti-diesel solenoid. On the side of the carb. On my 81 I lost the ground to it somewhere in the system and it took many many hours of...
The "spacers" (washers) are placed between the ball joint and the lower control arm..... Here is the write up:...
Do you have a picture of your carb you could post? I'm familiar with 79-89 22r's and their emissions... But i don't want to lead you down the...
The headliner is usually installed before the windshield and back glass, so its normal for the headliner toto be wrapped under the window... then...
check your timing yet?
Give it a spray... Rpm comes up- lean Rpm goes down-rich Rpm doesn't really change much- good That's a rough way to tell, lol, but it helps.
Yes. Have you tried spritzing some carb cleaner over the top of you carb yet? To see if its running too rich or lean...
Or you could buy the JTR conversion manual... ill buy it off you when you're done.
Where there is a will, there is a way ;) Maybe Erik will reply someday and give us his #?
They sell hydro conversions... but expensive. I'm sure you could look at the mustangs setup and modify the yota to use it..
I wish! Would love to see some video of this truck... Maybe when I get to a point where a motor swap is in my near future, ill head out to...
Did you unbolt the top too? Maybe use some twine/rope/speaker wire to keep the shock compressed so you can contort it out of the suspension?
Shouldn't ... the bolt on lowering parts up front (lca and spindles) only relocate the wheel closer to your fender, without affecting the stock...
Check the cylindrical metal part on the back passenger side of your carb... it has a red wire and a white wire. These wires run to the same plug...
Separate names with a comma.
