lol The title of this thread is a question...and you just answered it! Online diagnosing can b challenging and very misleading. Oil filled 3"...
I agree....Must be an "Add-a-leaf". The top 2 are stock, little one is not stock and the bottom one looks weird, but 3 leafs is stock. I would...
If the starter motor still turns over fine, you should get the contacts from toyota and open it up....Or open it up and check the contacts first?...
Maybe i'm a cheapskate, but i would do the inspecting before the oil change ;)
Idk if you plan on taking the engine out, but if its a bad timing chain guide, usually there are bits of guide and aluminum flakes in the pan/oil...
If you don't have a press, just get the axle/drum assembly removed and take it to a good machine shop- $40. That's what I had to do, since I live...
If you bought a stock 2wd, that is where your 4wd will end up sitting after doing a lot of work. The 4wd front suspension is lifted from the...
I've seen 89-95 rear bumpers mounted on 84-88 trucks....And i mounted a smittybuilt rear bumper on my '81 4wd that came off of my dads '86 4wd....
2wd springs have more arch= lift for 4wd....So, no. What are your plans for the truck? Does it sit high in the rear or something?
I read through the StanceWorks thread you posted....He could have given more detail, but i'm glad he kept up on it. I'm sure he will keep going...
yota4life- You have an 84-88 core support for sale?
I wish! If you have a diesel and don't have to smog, you can go to gas and not have to smog.....But not the other way around :(
Unless the smog laws have changed?? In Ca...You can drop a 5.0 into a 1991 miata. The engine has to be from a donor car/truck 1991+ The engine...
Yes, I am aware of how cool a 1uz is and sounds, haha. It wont be cool, if CA says I can't drive my truck though! Just looking for some insight...
Someday I'm going to park my truck and do a swap, but I live in CA. Looking for input from anyone currently driving a CA smog legal swap. I am...
My truck has a weak leaf spring that makes the whole truck lean to one side FRONT AND BACK...even with the torsion cranked UP higher on that...
Maybe I read this wrong^^^?? You installed the blocks. Then only lowered the drivers side torsion? That would explain why its leaning on the...
I usually find a spot to jam the wrench...like up against the frame, so I only have to worry about putting pressure on the jam nut.
I had the same question... I'm running stock length gabriel airshocks atm w/3" blocks. I'm getting ready to put the 3" belltech leaf springs on,...
Im not an expert, but correct me if im wrong... Get a W58 from a 4 cylinder celica= direct swap, but shifter is located 2" further back, as...
Separate names with a comma.
