What year is your truck?
When was the last time the doors were opened? Maybe the door seals have a good grip on the jamb? I agree with Jetas ...odd.
Compression, spark and fuel. Once you check all of that off the list you can start troubleshooting specifics like timing, flooding, etc...
Whatever fits really....check YouTube for muffler sounds if you had a certain note in mind.
Will it start with carb cleaner or ether?
I would reference a good vacuum diagram and take pictures....Most of the hoses can only reach so far, or are "trained", so it shouldn't be too bad...
Depending on how you lowered it, I'm sure they will get it as close as they can...
Yes.
Is that hole threaded or is there enough material to tap threads?>
Is that seal off of an earlier truck...79'-83?
Check your Vin. If its a short bed regular cab, its not. I think all 1tons had long beds?
Sounds like crossed wires to me...
How to Pass Smog A lot of good info here. Sounds like you need a cat....or your truck is idling rough (missing)?
Need smog results....What part of the test is it failing?
I'm not sure what you're asking, but if you decode your vin# you should have an 8" rear end with ??? gear ratio...iirc its a 30 spline axle. None...
LSPV = Load sensing proportioning valve When the truck is loaded and the ass squats, the rod connected between the axle and frame (where the lspv...
Supra is looking BADASS! Do those headlights have a cutoff line?
Have you tried working on JUST the nut and lock nut? If you can get a wrench wedged up against the frame and the other accessible with a hammer,...
Welcome back!
If its power steering there would be a couple hoses connected to it. A belt driven pump near your distributor and a reservoir on the fender with a...
Separate names with a comma.