I have noticed in the past few days that the ads have gotten out of control. Way too big and block content.
Well, as some things go, this project of cleaning up the wiring has gotten a lot bigger. I have pulled so many directionless wires that the stock...
Has anyone ever considered the intqke temperature sensor? It is in the AFM, but with my turbo, the intake pipe (and assuming the air inside it)...
Well, I decided to do some things. A lot of the electrical work that I have done both in the cab amd under the hood has been just adding and...
Try to compare your current ride height to stock specs. You are comparing your ride height to what you had before, but your new height may be a...
I've been looking at the wiring diagrams in my Haynes manual, and they have "early model" and "late model" diagrams. Does anyone know if 1986 is...
My first truck had it done. it is very common mod on the 22re in places that don't have Smog Inspections.
I just anticipated it. You need one resistor per bulb you replace, because they mimic the resistance of a single bulb.
I found this last night: [MEDIA] I usually don't like to trust Youtube University, but this was super helpful. I did the test and found 4 fuses...
I forgot to post this a few weeks ago. I got new tail lights, and installed all LED bulbs in them. [ATTACH] [ATTACH] [ATTACH] To eliminate...
They are Monroe Load Adjust shocks. They are fine in the rear, but the fronts were too springy. The alternator works fine. If I do get it...
i got some monomax shocks for the rear sitting on the workbench now. I hope that not having the spring assisted shocks will level out the truck,...
I remember smogging my first mini. Nobody in my town was even willing to smog it (later I found out that the battery/intake swap that the PO...
hey, Truckaction, your truckbed is less usable than a Maveric. To me the thing about a minitruck is that it is not only a sport vehicle, but it is...
These 'trucks' are what piss me off about the modern market. All 'trucks' these days are 4 doors and don't come with a 6 foot bed. They are just...
I've been having battery problems, and bike to work and the grocery store, so I really wasn't driving much. The last drive I took, I did hit a...
It is not confirmed that my alignment was fine before the front end suspension job. I've been doing a lot of research on at home alignments and I...
Dealership wouldn't touch it because it was lowered. I called half a dozen other shops, and most of them would not work on a vehicle that required...
stock suspension or lowered? (-; Dropped the truck off at the dealership, updates will come this afternoon.
Yep, a shop that does alignment but doesn't touch camber shims... a shame. I have an appointment at a Toyota dealership tomorrow morning. $150...
Separate names with a comma.
