we aren't as much of leg pullers here as on other forums. I too have no idea what ARB...
I wrapped the interior wiring harness, then put some of the heating system back. Before reinstalling the heating parts, I took eeeverything out,...
Hole saw. it was ok for the smaller gauges, for the large one I used a jigsaw, and for the indicator and warning lights I used a step bit. [ATTACH]
I think I have the gauge cluster bacing plqte where I want it. It is .063" thick aluminum. To protect it while fabricating, I covered it with blue...
Someone broke into my Chevy Colorado. I didn't have anything in it, but now I have a bunch of broken glass and a gallon of rainwater. That 700$...
I wasn't getting the idle to drop when I plugged in a jumper to the test plug, which usually means TPS issues. I did do some work on the throttle...
oh dang! that sucks man, I had a truck bed toolbox that was stolen with a bunch of tools and parts in it too. I keep on wondering where something...
What is the depth of your tank? Could you put the Toyota sending unit in there? From what I've seen, the stock tank depth of our trucks is 13.13"....
How is your truck doin these days?
Thanks man! I have been planning this work for a looong time, and it feels good to be getting it done. The dash is partially inspired by the...
Hey Redman, are you using your stock fuel gauge? If so, the only sender that works is your stock sender, I believe. Fuel level sending units...
This mprning I was working on getting the Gauges working. So far I have tested the AFR, oil pressure, voltmeter, boost, and water temp gauges and...
I finished the wiring last week, but the engine wouldn't start. I wanted to start the engine before I wrapped everything up. Well, this morning I...
I've got the engine harness squared away. The tesa tape worked wonderfully, and wrapped very nicely. [ATTACH] Next up is the Ignition system....
yeah, the green bottle was for windshield washer fluid. I'd like something else, but after years of looking for something, I may just have to...
For the new sending units for the gauges I had to use some adapters. Using a tee fitting for the water, I was able to get the gauge sender amd the...
No idea what the problem is. but I did get the alignment to a place I feel better about. I have the camber dialed in, and caster I think is darn...
those people don't drive Toyotas ;-)
Well, the thermostat housing won't work, the sensor bung hits the TPS. I know I have seen ones where the sensor comes out the top, not the side,...
I have a red top optima and after my engine rebuild (which took 9 months thanks to supply chain shortages) things started right up without a...
Separate names with a comma.
