The factory prop valve is variable, it senses the load in the bed and increases rear braking as needed. You can disconnect the arm at the axle and...
Here's another http://www.budbuilt.com/new/traction_bars.html
Check with Marlin Crawler.
Probably due to the wear a 21 yo engine would have. How many miles? When was the TC replaced?
Heck no. The new MC should come with some plastic fittings and 2 pcs of hose to do the job. Once you've bleed it on the bench and bolted it...
It's simple, but a bit much to explain here, GOOGLE it. Load Sensing Proportioning Valve. It's mounted on the frame above the rear axle, with...
No, the RET intake and exhaust manifolds will not bolt up to your 82's head. The late 84 and up 22R/RE/RET block and head are different from the...
An auto mated to a 20R is going to be a dog. If you're willing to do a swap like that, swapping in a 22R/RE and Toy auto would be better and easier.
Early 80's Coronas and Celicas.
At idle it might be 1/3 to 1/2, at driving RPMs maybe 3/4 (of the gauge's travel). The older/more worn the engine, the lower it'll be and...
If the brakes feel normal when you apply them, and then while you still have your foot on the pedal it starts sinking to the floor, the MC has an...
Separate names with a comma.
