most likely the rear wheel cylinders are leaking, you will have to remove the drums to check properly, or it could be the master cylinder is...
There is probably something wrong with your rear brakes or master cylinder if the stock drums do nothing, Mine is got a little too much brake bias...
It's not hard to shorten a driveshaft I've done a few, most times it will not need balancing, Here are some how-to instructions....
finally got back to working on shorty, I had a few issues with finding parts, and wrong parts turning up, sending back, and getting the correct...
Ebay and amazon
I just wish somebody would post and confirm they’d actually done the swap or seen it done first hand. Thanks for any input. Yes, I've done...
That makes it more difficult, It may work out cheaper to sell the 2 motors and boxes and buy a 3L or 5L Toyota with a 4wd auto on the back of it....
Does he want to keep the 4WD?
I've got the same model, they are a straight bolt-in but, depends on what your import engine came out of. You will likely have to change the sump...
You might consider an 18rg the are the twin cam version with a bore stroke 89mm x80mm. The block would be a straight bolt in but you would have to...
I read your other post, you need a wiring diagram to diagnosis your problem have a look here...
The bumper is from a 1980 SR5 which has the wrap around ends rather that the plastic ends. I have both types. someone has added bumper over riders...
I worked for a Toyota dealership in the mid 90s, the radio codes were stored on a computer with about 20 CD ROMs attached, you had to input the...
[ATTACH] I use a stealth kit, can be fitted in 10 minutes and works...
Ive got a stack of hilux wheels and there are a number of variations, they all look pretty much the same but some have lugs for hub caps, some...
I did mine recently, I marked the spine before I pulled it apart, I'm pretty sure you can put the spine in any spot it has no master spine, and...
check the engine coolant temp sensor, you can find the resistance temperature chart on line...
They are not that tight that you need a press, you can use a brass drift to knock the carrier off the bearing and it will tap back on again with a...
hope this helps https://www.hilux4x4.co.za/views/viewtopic.php?t=25960
With Imgur you're doing it wrong:-( click on the image you want in your post you will get a box full of copy paste options. copy the "BB code...
Separate names with a comma.
