[img] [img] [img] [img]
Still waiting for the guy to weld the manifold :-( I started on the bell housing today. Went to take some photos and of course, the camera was...
finally got the motor together, and running on the floor, next is converting everything to RWD. first up is the intake manifold which the throttle...
Often it's the contacts in the solenoid that get worn out, they are cheap and easy to replace,...
the short answer you need w55 bell housing, long answer is http://users.tpg.com.au/users/loats/technical/ma61/gearboxes.html
Now Im thinking that I also had to change the lower shock mount to the 1980 version as the shocks mount differently but it was still a straight...
Ok I took some photos 1993 frame is 1050mm wide at the axle which is the same for the 1980 frame please ignore the diff in the frame it is from...
Not to sure about that, I put the rear axle and springs from a 93 into my 1980 Hilux, apart from the driveshaft flange it was a straight bolt in....
is it a squeak squeak squeak that gets faster as you accelerate? drive shaft universal.
One thing you might want to consider is the older trucks have a smaller cab, If you are tall or large you might want to see if you can fit...
Ok, so not a concourse restoration then, I was thinking if you found another cab that was rotted out, you could cut the roof through the top of...
That's not going to be easy to fix, are you handy with a welder? The hole from the floor to the window wouldn't be too bad but the roof...
Its hard to see in the video, does the cab have the back cut off or is it a giant hole in the back bulkhead?
Shame you couldn't save the camper, Are you going to replace the cab? It looks like it will make a great flatbed.
Clearcoat the rust!
Have a look at this. https://www.ebay.com.au/itm/162021967958?epid=7018462987&hash=item25b9430856:g:dKUAAOSwWxNYwKB2
I just got a message from Emily, offering free sex talk.. sounds expensive.
You can get your wheel alignment very straight with a couple of string lines going from the rear wheels to the front. Make sure the steering...
Mine does it sometimes when the battery is at a high state of charge, It's an old Toyota thing, as soon as I use any electrical item it stops....
The feelers.
Separate names with a comma.
