leaky exhaust manifold?
I don't know that you're going to get much of a choice, there aren't that many aftermarket cruises out there, that are suitable, especially if you...
I've come across the no sway bar on the front too, Possibly did not come with the diesel engine vehicles but not 100% sure about that. The best...
Toyota codes are all the same through every model and are quite easy to read. LN80 RN90 the first letter is the engine ether an L engine which...
Also been watching the 4AGE youtube channel https://www.youtube.com/c/Garage4age/videos Also I forgot this one [img]
Ive had a few other projects on I've now extended the shed and put in a 2 post lift, and of course, I've had all the other crap to deal with,...
Sounds like you put the plate in the wrong way around, Remove the slave and lever the fork back with a bar, and see if you can get the clutch to...
Toyota 2AR engine is 2.7L all-alloy, can make some stupid power... have you got deep pockets? [MEDIA]
Looks great, where did you get the coil overs?
yep the safety switch, it only has to be a problem once. I worked at a shop where a mechanic started a car with a faulty switch. He started it...
Its the little stuff that will catch you out, flex plate bolts, into the crank and torque converter, shifter and linkages, inhibitor switch...
here you go https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=window+regulator+hilux+1983&_sacat=0
I put a mega squirt on my 1980, made a big difference, used a throttle body from a EA falcon. the write up is here...
The truck is in Australia, so the steering wheel will be on the incorrect side. Not that that matters, You might be able to pick one up from...
Looks like they still make them new, but maybe not where you are 2021 Toyota Hilux TGN121R Workmate (4x2) White 5 Speed Manual Cab Chassis $33,990...
I just use a click torque wrench, I haven't done much else for a few weeks I'm hoping to get an extension on the shed and a vehicle lift at some...
You can find floor repair panels on ebay at a good...
There is a fusible link or a fuse near the positive battery terminal, that would be the first thing I would look at, if it has a fusible link you...
I Haven't got that far yet, I can machine a few mm of the back and maybe the front of the bell housing if its an issue.
some more photos of the manifold and bell housing adaptor [img] [img] [img] [img] [img] [img] [img] [img]
Separate names with a comma.
