It's really not that bad to do, just take your time.
For cleaning the inside of the valve covers I always end up grinding of the head of the rivet, then drill and tap for some small bolts. Then bead...
If you can run it, go get yourself some dollar store oven cleaner and warm up the engine, then just unleash the can of oven cleaner all over (can...
Or just convert it to manual choke and be done with all those problems... :waytogo:
Definitely a matter of opinion. My built 22r (big cam, majorly ported, big valves, 10.5:1, hei distributor) sounded real good with a magnaflow and...
The intake is aluminium. If you try to weld it with regular carbon steel wire your gonna have a bad time. Take it to someone who can tig it for you..
I've tried the teflon tape on over tightened bolts and it really is a waste of time.. just do it right and get some helicoils and redo them....
22r has aluminum rocker arms.
I may have an emissions diagram in one of my manuals, I will have to look when I get a chance.. If you don't have to go through emissions I...
As far as I know that switch is part of the entire heater control assembly, which isn't to awful bad to replace. I had to on my 89 4runner and it...
I agree time sets are way better, but helicoils are much easier to get and cheaper. I've always just used helicoils and havnt had a problem.....
For valves, I'd just throw some stock 22r valves in your 20r head..
I guess it also really help to know the right people . I got all my head work done by a friend of mine, for what he charged me to do all the...
I don't know if your parts are made of gold or not, but you really don't need more then $1500 (not including sidedrafts or the DUI dizzy I...
You might consider just redoing all the wiring with a painless harness or similar.. if your having problems and a lot looks butcher it might be...
If you do side drafts your intake isn't an issue.. but if your stuck with a downdraft I would suggest finding a offenhauser dual plane, you can...
If I were to build one this is the setup I'd do.. -a majorly ports worked 20r head -Engnbldr OS stainless 22r valves (they barely fit the stock...
Do it right and you shouldn't have a problem again Get studs and nuts, and loctite the studs in there. Less chance of stripping with studs too.
To add to that, an e-fan could have a switch to override the thermostat switch and relay to be able to turn it off when you are cruising down the...
You should be able to get one (or order one) from any parts strore.. or buy some gasket material and make one..
Separate names with a comma.
