Another item I had to address is the compressor mounting plates, the 5mm nuts that I had tacked in place were failing, so new plates I had to make...
It is probably not, is thinner so to lay the front down further. Damaged it on our dam freeways ,uneven , hit hard at 80 ,tore one end. My ride...
remake Yes
[ATTACH] [ATTACH] Found another problem , the front brace between the lower A-Arm supports which I had made to lay lower , damaged from hitting at...
Bumper repair work while waiting on rotors Filling damaged areas with weld[ATTACH] [ATTACH] [ATTACH] [ATTACH] than body filler & paint work
Seth ( used to have Twisted Minis ) if I remember right had a art on that, if you Goggle it it should come up I had a pinion problem, that took...
Which ever way you decide , do a lot of research & planning so done once ,done right. Then start collecting parts! I rode static dropped for a few...
Drivers side caliper would not slide over the rotor, found it wrapped & cracks in it. Found that the e-brake cable ( not stock) was binding on...
Has to be after market ones out there!
Welcome aboard, nice ride Now get her sitting lower!
Today ,now that the paint is good & dry, I will load the calipers, install & bleed them, & get the e-brake cable back on & adjust the e-brake,...
Had to replace the rear calipers ,as when I removed the e-brake bracket the seal popped out on one of the calipers So two new ones were in order,...
Welcome & nice ride. Now just slam the bitch, lower is better!!
Looks clean,though will never be a Mini Truck!
It was time for new shocks & I wanted to go with BILSTEIN'S but talking with one of their techs they had nothing with the same extended &...
Got the front brake/shock replacement done New Wilwood rotors ( the black comes off) ,new brake pads, & changed from Doetsch to QA1 Next up the...
I love my W58 over the W55,works great with this engine
Well like every winter I have changes or repair work to do after a show season Got started today,first up change out a damaged power steering...
I have a rear Quickor Engineering bar ,had the front also, but when I went to tubular a-arms I had to remove it . Was going to have the front one...
Welcome aboard
Separate names with a comma.
