I like that part too. I noticed it right away. The 2 little pieces of frame rail and the stock round cross member. It keeps some of the OEM Toyota...
KYB Monomax shocks will improve the ride immensely. Amazon has them cheapest. They'll do more than any aftermarket coil (2" Belltech) will. The...
Cool little truck. You should consider the QA1 coil over set up for the front. It's the best setup. Adjustable ride height, spring rate options,...
It looks like a whale. I can't believe people actually buy these new cars. I'd rather drive my family around in a 67 Nova. I parked next to a...
The 808 is blowing up when it comes to lowered mini's !!:headbang: MT'ing will never die! :waytogo:
I am. :waytogo:
Technically shorter coils require shorter shocks so they're running in the center of their stroke. 2" drop you'll be ok with a stock length...
On top of the leaf pack on a 5 lug (spring under axle) will lower the truck, on bottom of the leaf pack on a 6 lug truck (spring over axle) will...
Bags = cutting the bed. Otherwise you can slam it static with a deep c-notch and keep everything under the bed.
Looks good. :waytogo:
2 options. Use a smaller block on the low side or use one on these bolt on leaf spacers on the high side...they come in 1/4", 1/2", 3/4", or 1"....
Sweet little truck. Love seeing the progress, thanks for sharing. I also like your username and avatar too. :waytogo:
If you can, just take a rotor and set of pads from one side to the store for comparison. Good time to inspect & re pack the wheel bearings while...
I've heard rumors around the forum that Belltech ships their leafs with the bushings in the wrong ends. The person has to swap them. Haven't...
The problem with fancy helmets is when you really have to cram it down into crazy areas and get down and dirty. It's one thing to be jammed into...
I got lucky...my wife bought my Radnor for me for Christmas a long time ago, I think it was in the $200+ range. Then I was doing a c-notch on a 80...
Nice ride! Those wheels look HOT! I can't believe they're tuckin' with that much dish. Well done!:waytogo:
That's pretty awesome man! Here's mine. A Radnor and a Miller. These things have been squeezed between the cement floor and truck frames more...
Just gets worse and worse...they should just go with Prado and stop disgracing the name Landcruiser. Or maybe change it to Freeway Speeder, or...
I just realized why I mentioned getting new ball joints...because when I did DJM arms, I also did Belltech drop spindles, and that's when I...
Separate names with a comma.
