Is this the adapter you were referring to? https://www.jegs.com/i/Trans-Dapt/969/2120/10002/-1 I see they also sell this model but it was listed...
I currently have a coolant line on the intake manifold. Would it be beneficial to cap this off and reroute the line, or would that increase temps...
I've swapped out the fuel filter a couple of times last year since this sat for years with old fuel in the lines. I recently just swapped to a...
I'll check this the next time I drive it. Thanks
I guess it would be a good idea to keep the FPR for now. Would I need a different manifold to run a one piece weber? Currently I'm not running a...
Thanks. I'll add this to the list of items to check. Haha
Checked compression on all cylinders and they are within 156-160 psi I believe I'm running the two spacers. I'll need to double check. I guess I...
The rotor and cap have less than 3,000 miles on them. Can I check the fuel bowl visually with the filter off on a Weber? I've heard other...
Thanks for that scan. I used this as my guide and it seems to be running better. It's set to the mark on the right of the pulley now.
His timing light had this feature. Super handy. Looks like I just need to adjust it to the second mark (on the right) for 8 BTDC
Here is an example pf the misfiring/backfiring issue I'm having with my 20r. Before I adjusted anything I wanted to see if there was anything...
I'll see if a buddy of mine had a timing light I can borrow. Hopefully it has this advance feature. Any idea what the second mark on my crank...
I figured I'd need to find TDC this way. I'll do this first to make sure everything looks correct and figure out how to get it to 8 BTDC. Thanks
Long story short. I had a friend try to help me out and check the timing on the 20R. Driving home I could tell something was way off. Felt much...
Thankfully I was able to clean up the threads a bit and made it work. I figured I could cut the end off and replace the fitting before I purchased...
Wow, I hadn't looked at this thread in a minute and the truck is really coming along. The work you've put in has been amazing!
Long story short, I need to swap the hardline from my parts truck to my '77. I'm not 100% sure if one of the fittings will end up leaking once...
I recently completed my 5 speed swap and for the most part everything went smoothly. On a recently trip I was using Waze and noticed the GPS...
Since I couldn't get the stock coolant temp sensor to work, I went ahead and installed an Autometer coolant temp sensor which has worked out...
I believe I ran across that one. I'd rather not spend a lot of money on a headunit if possible. I just need something that will get the job done.
Separate names with a comma.
