Started to assemble the final pieces of the engine run stand to re-test the 18RG since it has been in storage for such a long while. You know,to...
https://www.ebay.com/sch/cdinkler/m.html?ssPageName=&_trksid=p2057872.m2749.l2654 This seller is usually at all the Toyota Fest with parts for...
Well, sometimes you know things are gonna require replacement. The Exhaust manifold from the 18RC was filled with rust, dirt and mud from the tip...
The specification below those photos was taken directly from a page from Pertronix Catalog 2012 I believe. [img]
Well late yesterday afternoon, I went inside the garage to start pulling the engine out of the Celica and ran into a small problem with having too...
[IMG] [IMG] Pertronix systems use the same setup for multiple Toyotas per this example... Same setup worked for the 2TG... 1977-75 4 Celica,...
Oh well, I guess I will see after they arrive..:brickknock::brickknock::brickknock: Lowe's is just down the road less than 1/2 mile, so I will...
[img] [img] [img] These are from the 1980 Toyota Pickup Repair Manual... Hope this helps...
Welcome to the forum. You actually live close to one of the better Junkyards to pull parts, off of Cherry Avenue, once was an import only, not...
Thanks for that information. I somehow found that item on Ebay after your suggestion and its currently on order. (eBay item number: 281265869773)...
eBay item number: 153484690021 eBay item number: 333371735749
Ok, so I looked in the parts book to see what you were referring to and still do not know why that would be the only way to secure the window....
Passenger side window was sitting at the bottom of the door was would rattle if I touched that door which was driving me to finally get out the...
Well the day started out good, the rear sliding window arrived today, kind of unexpected since I was told that the window would not ship out from...
Outstanding!! I like the drawing and see what you now mean about the beam in your truck. It looks like whom ever was preparing the truck so that...
Do you have a photo of what they did so that I can see what to avoid. The reason I have not moved forward with installing the five speed attached...
I think I'm gonna have problems with the transmission cross member...
Well, parts are starting to trickle in: 1. Shocks front and rear 2. Idler and Pitman arms 3. Clutch Master cylinder 4. Ball Joints upper and lower...
Sometime it is from the protection of a good woman standing between a former employee and a former manager that words could be shared, without...
Update: I believe this block has to be hot tanked since I did try the chemical method first and then the strong arm mallet way with the 1 inch by...
Separate names with a comma.
