Here's my truck dropped around 4-5" in the front with 225/40/18's: [IMG] I pulled and rolled the outer fenders and had plenty of clearance...
I like the site as is. It runs pretty smooth. It's not bogged down with ads. I like the fact that it's fairly small and specifically caters to...
1. Move the linkage so that you can use a block off plate. JB weld isn't going to work well. 2. Negative on the silicone. You need the...
<< One more guy with 2.5 :waytogo:
84 Mazda B2000 [IMG] Still runs, but it's getting super rusty by now.
Took a few pictures of my two trucks together down at the track: [IMG] [IMG] Looking at these pictures reminds me I gotta paint my...
You're right; 15's = weak. I still think your supercharger idea is good though.
22R/RE intake manifolds bolt up exactly the same; no issue there. You do need a 22R distributor for the mechanical advance, but there is no...
Did 2 hours of prep for 5 minutes of painting: [IMG] (I'm a bit OCD and I hate overspray.) :p Also did some claybar on the roof and...
Thanks guys. It's Krylon Fusion paint (rattlecan).
Did a second coat today, also added a pinstripe all the way around to complete the look. I finally got a bit better at the painting. Didn't even...
I did a valve cover by hand once; just worked on it every now and then when I had spare time until I got tired of it. Took me about a year to...
Looks good, way better than stock wheels and gigantic tires. :waytogo: (Although it would look even better with some 205/40's on.) I say just...
I have a stock cable pulley welded to the throttle shaft on mine. Don't have any pictures of it though, sorry. You will also need to make some...
Did your truck come with a 22R originally? The 22RE cable is longer.
My two-tone a.k.a. "cover up the fading paint" paint job. :p It will hold me over until I can bring it to a paint shop for a real paint job. I...
Created an interesting two tone paint job to cover up the fading clearcoat on the top of my fenders, hood, and roof. It'll hold me over until I...
Wire wheels tend to make deep scratches that are hard to get out, especially if sanding by hand. I did a valve cover before where I shaved off a...
I have a 20R valve cover on my 22R; fits perfect: [IMG] [IMG] This was just a quick polish job, only spent about an hour on it. :waytogo:
Wet sand with simple green.
Separate names with a comma.
