I’m guessing you’ve hit the “contact us” link at the bottom of the page? Sadly there’s little traffic here, if we started talking politics I’m...
Bump.
I think he’s saying he removed the center bolts that hold the springs together, also used for locating the axle in the vehicle. In which case yes,...
Lots of guys set timing by sound, in your case I wonder if your balancer is bad and the timing mark is off. As stated above, find tdc manually and...
Unless you’re sitting in the bump stops, or the springs are bound up by the shackles, that makes no sense. A 4” block will give you very close to...
No, it should be pretty close to advertised drop. Measure your rear blocks, they should be 4” thick as that would result in a 4” drop. Also make...
Neither will settle if you just did arms and blocks, settling only happens if springs are changed. Torsion bars can be tweaked, yes, but for the...
I used these Pioneer 4”, sound like crap and barely fit, but they were cheap, I didn’t want to cut anything and just wanted to have something to...
What did you do for the sound system? I installed tiny dash speakers in mine that sound like crap, and just some small marine speakers in the back...
Try doing the free stuff first, so yes you can loosen the torsion bars and remove a rear leaf, yes it will ride softer with a leaf removed, but I...
Damn, that’s gotta be some kind of record. Stay away from me bud, you’re baaaad luck, lol. That is funny though and strangely enough 3 days ago...
Thx, a bit pricey yes, also on backorder. https://www.lceperformance.com/LC-Pro-Air-Intake-Kit-22RE-EFI-89-95-p/1061508.htm Seems like it may...
Power? Lol, I just want to clean up the bay a little. Would love to remove a bunch of crap from there, but honestly I don’t like car shows, much...
Why is the air flow meter on the wrong side in our trucks? Mine has an open-element air filter so I’m only getting warm engine bay air anyway, but...
As stated I’d be looking for a fuel supply issue. Personally I’ve seen at least 2 cars (both mine) with rust inside the fuel tank causing this...
Glad you passed, when we had it here I used to do them during morning bookings, and with hard to pass cars we would use some Methyl Hydrate in the...
Washers will work, just gotta make sure they don’t sit on the taper and fool you into thinking they’re tight. One more thing with castle...
Welcome Junior!
Wow that’s a lot of work, good job!…..I’m sure you already know that you need to space those castle nuts quite a bit.
Quick update on this, pulled VC today and found nothing, valves all set correctly, I used this as a reference...
Separate names with a comma.
