Probably an “octane selector”. Back in the early days some gasoline had lower octane ratings than others. That knob allowed you to fine tune the...
You need some type of Haynes or Chiltons manual. A points distributor is one of the least technical designs out there. A minimum you want points &...
Distributors of that generation usually don’t go bad. You have your points and condenser. Everything else is mechanical. Your symptoms sound like...
Just for future reference. When you ask for troubleshooting advice state all the modifications you’ve made to factory original. I was leaning...
You need to find top dead center. Everything else will fall into place. Check your firing order. 20R is a bullet proof engine.
I’m also confused. Take some photos of what you’re describing. Picture will help.
Not sure if this has any value. Just thought I’d throw it out there. https://www.facebook.com/marketplace/item/369320758763174/?mibextid=9R9pXO
On a given assembly, one of the ends is left-hand threaded and the other is right-hand threaded. If they were both the same, rotating the collar...
Speedway Motors Bucket Seat Frame Mount Bracket, Features Welded Steel Frame and Black Painted Finish, Compatible with Most Applications, May...
Crank oil seal is a common fail item. I’m guessing you did it at the same time you did the timing chain. If not, do it before any long trip.
W50’s we’re known for shift fork troubles. That’s why I asked what transmission he had. As far as double clutch goes, you have to increase rpm...
In the old days before synchromesh transmissions, it was common to “double clutch “ between gears. You can google search this procedure to see how...
I’m a purist but I like the look.
Try shooting some WD40 into the lock cylinder itself. Use a small screwdriver or awl to move the outside dust cover before shooting the WD40...
Try dinosaur electronics. The manufacture custom circuit boards. They might have something that will work.
I don’t think the filter is that important. I have none on mine. I doubt you will find a factory replacement. You could buy a heavy duty nylon...
Try eBay. That’s a factory only item. You could retrofit a vent cover to hide the hole. See attached link for an example. Douzime Boat Cabin...
https://www.facebook.com/marketplace/item/1406952200146851/?mibextid=9R9pXO
https://www.facebook.com/marketplace/item/3514974075382989/?mibextid=9R9pXO
Something like a step and tow bumper would be more useful on the rear. Gives you a step up towards the rear door.
Separate names with a comma.
