You could leave in place and drill for new barb. Also, check those other openings, maybe one is a manifold vacuum port.
Far left is a vacuum port. You could reuse that fitting by drilling and tapping a hose barb fitting on the face, then capping the two small...
I would use the larger port. You could drill a hole in the face, then tap a threaded hole for the proper size barbed hose fitting. If the hole you...
I think that’s just an unused attachment hole. Most vacuum ports have some type of fitting on them. See if a small drill bit will push all the way...
the large water nipple on top of the manifold needs to be connected to the long steel pipe that runs from the water pump to directly below the...
Any manifold vacuum port will work. Later engines had a connection port on the intake manifold (see picture). Your manifold lacks that connection...
Yes. All interchangeable
75-78 is interchangeable.
Don’t respond to any questionable posts. I saw your response and thought it was a legitimate post.
As I believe I mentioned in an earlier thread, your build plate will show your factory paint code immediately followed by your trim code. As to...
Friction fit. They have small serrations on the backside that grip the plastic grill. You could add a thin layer of clear silicone to the backside...
[ATTACH] My trucks white. I painted the insets silver. I doubt you will find anyone who will know the difference. You will want the stainless...
Any recommendations for quality head gasket for the 1978 20R? I’ve gone through 2 Felpro gaskets without getting a good seal. Factory gaskets are...
If you watch old episodes of tv shows like Adam 12, Chips and Emergency you will see plenty of old Toyota trucks. Usually background during...
any other ways to check oilpressure too aside from the idiotlight? Any aftermarket oil pressure gage can be installed on your engine. Tee into...
Ha….. I’ve got an aftermarket 8 track tape player (NOS). Been sitting on a shelf in my shop for years. Made by “Automatic Radio”. Same setup I had...
Ok. It’s good the two systems are separate. Most aftermarket tape players from that era are manufactured to power up to a total of 4 speakers....
That’s not factory. An aftermarket unit. Go online and lookup the operations manual for that recorder. It sounds like a simple balance issue....
Flasher relays rarely go bad. If your emergency flashers work, it’s not the relay.
Your factory harness will have a total of 5 wires going to the rear tail lights. Your harness should have the same color code as my 1978/79. My...
Separate names with a comma.
