Interesting.... I thought Belltech was the only game in town, especially for these old, import trucks. I'll have to check them out... Edit: Did...
I dunno; I think if it were me (and it kind of is, since your problem has me wondering about my Beltech parts), I would (and probably will) first...
Oh, I just assumed since you didn't say it was squirrelly before your suspension work that it was okay. Sorry. :-)
I've been studying your alignment sheet... Did a little googling to look up SAI (Steering Axis Inclination) and the definition for Included...
Wow. No wonder your truck feels squirrelly. You need more and positive caster for the steering to self-center and toe in, not toe out.... Also:...
That's just.... weird. They're camber shims. Adjusting camber is a part of an alignment. You insert or remove them as needed. I wonder how they...
It appears to be the same as yours; it has "2000" cast in the hub carrier.
So I took a closer look at the drop spindle I bought, but haven't installed yet, and comparing to your photos, there is a difference in the...
Yeah, I've been staring at the pics as well and nothing jumps out at me either. The only thought I have is I see op has the drop lower arms...
If you can't find the Redline one-piece adapter, Transdapt (no affiliation) sells a one-piece raised adapter.[ATTACH]
This question seems to pop up regularly. I had to pull out my yet-to-be-installed kit for another reason so I thought would take a couple pics....
The smog legal Weber kit from Redline (k8747) has the one piece. I'm sure you can find one on ebay. Edit: Or maybe not. Just did a quick check of...
The hose attached to the bottom of the air cleaner is probably the vacuum hose to the hot air flapper valve in the air cleaner snorkel. Sounds...
Disclaimer: my reply is based on a FSM for the 1979 Celica. It should be applicable.... As Fred Heath said, it is part of the emissions...
From FSM
Unfortunately, my service manual (for 1988 pickup) doesn't say the maximum amount of shimming. But it does say to check the steering axis...
For your rough idle question, just increase your idle rpm a tiny bit by turning the idle speed screw?
The CA smog visual test tricks in that old thread are okay for a quick and dirty fix but might not all be really necessary.... Redline sells a...
I had hoped my 1979 Celica FSM would have a few pictures of the W50 throw out bearing but this is the best I could find... The best i can discern...
There are wheel shops that will "fill and drill" a new bolt pattern on alloys. Although, it will then depend on center bore and mounting pad...
Separate names with a comma.
