How low did you lowered it? Mine is on drop arms so I think it is either 2-3 up front. Back I had to slight hammered the fork where the mounting...
This is how she sits on 205-65-15 eagle alloy 058 0 offset.
Here's a pic of my 15x7 0 offset. Very close. Just slow down a little when turning. No rub so far.
Think there is a circuit 10, but harder to find.
Not sure if they come in 5x4.5 15x7. If they do most likely +40 .
15x7 with 5.5 inch backspacing is pretty close to the ball joint.
Offset is not 25.4. 15x8 will work, but if you lower it to certain height it will rub fenders. Here is mine with 15x7 0 offset. My truck is lower...
just curious, what is the offset or backspacine off the 16x7?
40-45 series tires your gonna have to watch out for pot holes. any metal will bend.
can't decide on +12mm 0r 0mm. don't know which will looks better on truck. any got pics with them on? 15x7 Polished American Eagle 111 Rim 5x4...
Thats a lot of work to get them shining. Wish I have the time and skills. Last time I tried some, I gave up after sanding and sold them.
So the deal is 4 16x8 w/tires and 2 16x7? If that is correct, it is a very good deal. Too bad it is on the other side if the states.
Got a set of those in silver.
What year is you truck?
Factory lugs only screw in about .5 inch. Don't know how you all can get different lugs to work,but let me know which or how cause I would like to...
Sending you a pm
I need to soften my ride a bit. My back is getting beat up driving tractors for 8hrs. I forgot to have them try the back for clearance. Anyone can...
I had the crown victoria before. The center bore is slightly larger. I think it was around 71mm. The only problem is you have to put new stud in...
If the hub is smaller, have a machine shop bore them out. The only down side is they charge $$. I was gonna have my jeep mesh bore and they wanted...
I just want to confirm 0mm offset with 15x7 will fit. It barely clear and you will have to slow down on bumps and potholes. you will probably have...
Separate names with a comma.
