All of it. :lol: I now max out the steering box. I can turn around on a street barely crossing the center line now.
I removed my stop bolts completely. No appreciable rub on anything. It turns fantastic for what it is.
There should be a few small tack welds holding the spacer on. I wouldn't be afraid to cut the new bracket and run 3 bolts either though.
There should be a single wire round plug with a rubber cap with the power wires for the ignitor. That's the tach lead. Just plug into it.
I don't know if the tires rub but I know the timing chain rubs the head and timing cover due to BOTH guides being broken. :lol:
It only fits one way the bolt pattern isn't even.
Sorry life got busy for a bit. 14 3/4" from center of the pivot bolt to the center of the ball joint. The lower ball joint looks just like the...
That's because the g code 8" rear axle bolts in and will hold more than most will ever put to it. The supra guys run the stock irs 8" 3rd well...
Bilstiens in the 5125 variety will make the truck ride like a Cadillac. Best bang for the buck shock I've ever used on a 4x.
It's just a little late to worry about cutting old metal. :lol:
I won't be able to measure my trucks until Saturday but I'll do it. I think the difference is in the valley joint mounting pattern.
The only people that say not to put a weber on a truck do so because they couldn't figure out their stock carb either and ended up at a shop that...
3 coils cut up front with the pad on the lower arm for the bumpstops removed. The bumpstops was trimmed also and I did a ball joint flip as well....
I've been keeping my eye out for a runner donor to build exactly this rig. Maybe I need to sell my 84 x cab and go on the hunt. :D
Welcome to the land of liquid sunshine. I'll be blasting through pdx in my freightliner right about rush hour today. Lucky me! What are your...
Everybody with round headlights wants square and square want round. :lol:
Just notch it now and getting it over with. :lol:
4x4 leaf springs with the 3rd leaf removed and use the 2 wheel drive overload spun around backwards. You'll have to shorten the shackles about...
$350 for a rotor? I can do a near bolt on lexus conversion for both sides with 12.4" rotors for less than that all done and stopping. No they...
I can't find it now and my mind may be wrong but it seems like there is a wilwood caliper that's interchangeable with 4x4 toyota. I could simply...
Separate names with a comma.
