There isn't a cut off. That's just a chunk of glass suspended over the bulb not a projector. :lol:
Those headlights are fawking terrible. They blind oncoming traffic yet you can't see worth a damn at the same time. :lol: If you want to be able...
1 ton front bar, 92ish 4runner rear bar mounted upside down, spun overload to act as traction bars and monomax shocks will get the party started....
A month and a half to do a timing chain? That's an afternoon job. :lol:
I'd be cutting that hitch into pieces and rebuilding it to either raise up behind the bottom of the license plate and losing the bumper completely...
You can go as low as you want and still haul if you build the truck for it. I haul scrap metal, everyday household/lawn & garden supplies and a...
Did you get it aligned after installing the spindles? If not you know have massive toe out causing issues.
Autocross beater
Next to the fuse box under the hood is a little gray rectangular box. Pop it open and with the ignition off short t1 to e1 with a jumper wire,...
1 sounds like a bad ground. I'd start at the cluster and work out from there. 2. Most leds are polarized which is why you had to turn them....
Show me a header that actually uses the pear ports instead of a round pipe at the flange. The EGR ports are drilled on most headers made after...
Depending on the brand a header built for a 85 and prior 4x4 will fit into a 79-95 2x4 truck but the sway bar has to be removed. Some brands...
Doug thorley got bought out so no, the current headers they make aren't as good as they once were. He's back making his own headers again under...
The crossover plate isn't needed unless you like spending money. :lol: Blocking off both ends of the passage negates it. There is a writeup in...
If you don't have emission testing then I'd yank all that crap off. If the EGR has 3 wires on the sensor then you'll need to put a resistor in...
For what I do yes, I like lce over thorley. I ran a thorley on my old wheeler and it was fine but in my autocross truck bottom end torque isn't...
I always delete all the emissions crap since it's not required in my area and it's just in the way. I'm running an lce "street" header. Nice...
4 door 4runner doors are shorter than pickup or 2 door 4runner doors and the top of the window frame is swept back a few inches further. Not...
Measure the thickness of the ball joint flange and the thickness of the lower control arm. Now add them together and you'll get your actual drop...
Lsd's from Mk2 supra for 7.5" and mk3 for 8". I love my w58. I have it backed by 4.10's and it cruises 70 at 3150 rpm. The 1-2-3-4 shifts...
Separate names with a comma.
