You sure you have the right regulators? Solid windows and vent windows have different regulators.
Now that brake fluid is on the diaphragm in the booster you're going to have to change the booster too. You can get by with swapping the master...
Sr5 or turbo wheels.
Aero wheels are cheap, light and available in a pile of colors and pretty much every backspacing you could ever need. Check speedwaymotors.com...
Good luck with the sale.
You'll like that header. Just be sure to leave the nuts loose holding it to the head then put a wedge between the header and torsion bar so when...
Looks like I'll be off all day friday and Saturday afternoon. I'll pm you my number.
Never heard of slapper bars? Back in the late 60's it was common to have a piece of box tube welded to the u bolt plate with an adjustable rubber...
You'll need stiffer shocks to control the 1 ton torsion bars. I have stock application mono max all around and the front is decent but it could...
I like my 4x4 leafs. Low with payload capacity intact. You'll want to shorten the shackles too so your pinion angle won't getting too wonky....
Ifs era 4x4 will have a 58.5" WMS. Depending on what year 5 lug 30 spline shafts you have they may fit a 4x4 housing but not the 90's 4x4 housing...
Axle shaft lengths and spline counts are different as are 3rd member bolt patterns so no, none of the parts interchange. You'll need to find a G...
4x4 will be 30 spline axles and an 8" 3rd member. G code 2x4 trucks have 3.07's in an 8" 3rd member with 30 spline axles. They are fully...
I'm in kennewick. I'm out on the road now (truck driver) but I'll be around later this week or by the weekend at least. We'll see how things...
The seal is a national 223840. If you're keeping the 2 wheel drive front end I have the stock bumper from my 89 in the rafters in my garage...
W series or g series both use the same bell. The w58 was available in early 80's celica too. I want to say they were in gts models. Other than...
There is no direct bolt up 6 speed manual for an r series. If you just want a higher top gear swap in a w58, it's 5th gear is 8% taller than all...
I used that bar because I already had it and it mounts to the front of the axle so it puts the torsional load on the middle of the frame
Perfect. :D
Hold off just a bit longer... I'll know in a week or so if I'll have a chunk of change landing in my lap. If so I'll head your way and hand you...
Separate names with a comma.
