What does deep back spacing have to do with technology center bore? I'm running 1 1/2" spacers up front and 1" out back. Amazon has some decent...
Full spools are weaker than a properly welded carrier. I don't think I've ever seen a mini spool for an 8" either.
I've gone down the ghetto fix route so many times myself that I cannot talk smack about others that do the same as I've done. But I can say...
That's a $30 charge for pieces that won't wear out. The shifter seat bushing that Marlin sells is uhmw not the same urethane that deteriorates...
Wow your handle is shot. That rubber piece goes under the stock bushing to space it up. The white bushing snaps onto the tip of the handle onto...
If you still had a shifter seat bushing the handle wouldn't drop below the pins.
The upper A arms and lower control arm bushings suck to remove but that's the hardest part of the installation. I used a couple pieces of...
Clean the area around the stick and you'll get a clear view of the steel retainer holding the stick in place. Push it down and turn it counter...
Yup G code with 3.07's.
Jack the front end up. Back off the nut, turn the screw in till it bottoms out lightly. Now turn the wheels back and forth and check the...
Well then you don't want the one I have. :lol:
Your pitman arm is fine. Check the backlash on the steering box. Odds are the box just hasn't been adjusted since it's been rebuilt and the...
I may know a guy with one sitting in a storage shed that's a Lund Moon visor so it's got clearance lights.
This isn't my first forum so don't think for a second I'm offended by words written on a screen. :ROFL: Here is a pic that shows both the 15x8 5"...
Do you see a wheel diameter listed in that chart? Neither do I. The diameter makes a huge difference in fitment when it comes to a wheel...
That's lil Lola's truck from right here on the forum.
You won't be able to turn with that backspace. I ran 5" backspace 15x8's for a long time and they rubbed the upper A arms, rear of the lower...
Lce header is a solid choice. I'm very happy with mine. I've had 8 different headers on 20/22r/re's over the years and about triple that in...
On sale. Usually wally world synthetic 5/20 in the wife's xb and my junk gets delo 400 since we run through barrels of it at work and the pump...
You are going to hate those headers. I ran a couple sets of cheap block huggers before I finally got tired of pulling them off to weld them back...
Separate names with a comma.
