Those other timing marks coincide with lce camshafts. If you had an lce race #1 cam you'd use that set of marks etc.
With new rings and bearings that aren't worn and beat up the engine will be harder to turn initially. Timing looks fine but why not adjust the...
Other than this weekend I'm free till the 13th so bring it on by and I'll fix you up.
The pitman arms are different. The sector shafts are different size and spline count. Odd thing, my dad's manual steering 84 x cab with stock...
One of these days I want to check out your headlights. I've been thinking I need a set of them. What bulb do they take, I assume an H1?
No power tools needed unless the tie rod end into the pitman arm needs a press.
Power to manual... reading is fundamental. :lol: Remove the power box and pump/reservoir assembly. Bolt the manual box and it's stock pitman...
Finally had the time to get it apart. I think I found the issue. :ROFL: #1 [IMG] #2 [IMG] #3 [IMG] #4 [IMG] And this is where it failed...
I ran 6k 55 watt in my truck and lost a ballast. I didn't get too excited about it since the ballasts were zip tied on one end and bouncing...
35 or 50 watt? If 35 watt they're going to be ricer extraordinare and seriously suck in the rain. 55 watt washes most of the blue out and makes...
A solid base will be better in the long run. Interior is easy since there is some major crossover over the years between cars and trucks when it...
Screw it, the old engine is getting fixed until I can yank it out for a beams & 6 speed. Ordered a factory head gasket tonight, gotta pull the...
Leaning towards upping the game a touch while I fix the truck. Going to go with a delta cam with matching springs and big valves with some heavy...
I wasn't sure if there was something special I wasn't seeing. :lol: I thought your intake was a custom powder coat not the off the shelf color of...
So what's so special about that valvecover?
All r series valve covers will physically bolt to the head. Some don't have the bolt holes in the correct spots for parts that bolt to the...
The 4 speed doesn't have an overdrive gear. It is 1:1. It came with an 8" rear axle because 3.07 gears weren't available in 7.5" to allow the...
4th is 1:1 in the trannies we're dealing with. With 235/45/17 and 4.10's I'm spinning 3200 @ 70 with a w58. It's s fun combo, 3.90's would be...
For the last few months I thought I was dealing with a carb issue. As I had a few minutes and some motivation I'd tinker with the carb lowering...
67-69 camaro or standard pickup will work fine. For the rear the stock application will be perfectly fine too.
Separate names with a comma.
