I really don't think the sway bars are worth shipping. They really need to be wire tied to in a wood supported box or they will tear the box apart...
cover up your truck, then feed them some alkaseltzer
I will post a pic tomarrow, I am using the rest of the kit still so it will just be the tube.. and shipping would be a killer on the sway bars.
its much thicker, mandrel bent and much nicer chrome heres the whole kit on ebay...
figured now would be a great time to do a wire tuck.. my front clip should be here tuesday. [IMG] that spiffy looking crank pulley, timing tag...
true that. I really didn't mind manual steering until I put the 18s on
I have had that intake for at least 4 years, but I only ran it about a year. its pretty much identical to this one , only the tube bends 90...
my truck didnt have power steering and I added it... I almost regret it because it made the truck noticeably slower, its ugly as hell, makes the...
ok I need to get rid of a ton of parts. I would prefer to have the big stuff picked up locally, but if its small I will ship it. belltech front...
tuesday means monday next week in body shop time.
the ignition box is not mandatory if you just want to change the coil.. its literally switch one out for the other. it should be extremely simple...
they look cool especially with whitewalls. I would personally never run them because I like high performance tires more.
not too many pics of the late front end of my truck.. I originally did the 4runner front end using all aftermarket parts and the stock core...
I was going to do a little write up, but the pictures sucked. I used a 3 wire because I figured it had a better chance of working with the u/d...
GENIUS! Now I just have the minor issue of the roll pan. ...you know your a minitrucker when you weld a metal plate over the spare tire access hole
Thank you and yes sir that is a 140 amp power master gm cs130 . I snapped the mount in half so I think I will try the LCE version of the mount...
as many of you know, I wrecked the front end of my truck pretty good last month. Now its time to fix it. "we can rebuild him, we have the...
that wire is copper, its silver tinned to protect it from corrosion... where are your grounds?
I outgrew 3 craftsman boxes before I signed my life away to the tool man... the last one is barely in the picture to the right .. I still have my...
if its a plastic dash, sand it all down.. I personally use 320 grit then 400 with a d/a sander and by hand to get the small stuff. If you are...
Separate names with a comma.
