on toyotas, it all bolts up. IIRC for a 2wd you have to finesse the radiator support a little but that's it. On a dodge/mitsubishi truck nothing...
Mine came right off even after 20+ years. lift the wiper arm, wiggle with a little pressure underneath. and my trucks definitely rusty.
Definitely a notch. 8" total in back. 4" springs + 4" blocks. pray you don't find a crack in the road, much less a driveway or speed bump....
Roughly. You'll have to measure when you do it. When I did it it actually cancelled out the lift from the gas charged shocks I put on. (monroe...
the BJ flip will lower it ~1" but will not affect camber differently than going over a bump or putting a few sandbags on the bumper to lower the...
What RPM is it idling at? When were the valves last checked? Does it run OK otherwise? Can you be more specific about the problem? I've been...
You have that backwards. Don't worry, you aren't the first. Half the people in my transmissions class couldn't grasp the concept and one guy still...
If you're in California and want to stay legal, check out the CARB website, they list every part approved for use there. Alas I don't have a...
Technically you should. Otherwise the upper arm articulates which could affect the alignment. In the real world though, the change is so small it...
For a 2wd front, 90ish chevy 2wd 1500 shock just needs some filing on the lower holes and goes right in. valved for a 4k lb truck. I got monroe...
The real question is what does the inside look like? the coolant outlet looks disgusting
Using the right tool is always easiest. I've done the wet paper trick...it works but it takes a while. You have to stuff about 2 full pages of...
You need a clutch. Textbook symptoms, despite some ignorance still floating around the internet. Sources for clutches. Main ones I can think of...
I've used scotch brite pads in small engines It it won't let the pistons move, you need to pull them out and get it done for real, not just a...
Nothing mentioned will limit travel...Bigger bump stops will keep the pumpkin from hitting but that is basically the same thing elsewhere. You...
Yup, last gen (mid 2000s and up) crown vic/grand marquis/town car. Just gotta attach it somehow and figure out springs...it's meant for an extra...
that's not defect. That's just wear. Everything wears as it ages and it's used. Probably nobody lubed it up for a long time contributing to...
dorman catalogs, if you dig deep enough (What most parts stores carry) say the 4wd rear stud is a longer alternative for the 2wd. unfortunately...
How many times do you need to be told to get new relays? better relays. Yes it's gonna cost a bit. 10a is the most you'll find in a consumer...
Use the engine mounts for a X7. Stock X7 mounts are how you put a 5/6/7M. In a 4 cyl truck, they match up with the stock truck mounts. 6 cyl...
Separate names with a comma.
