uh, that's for the PAIR system, it reduces the pulses in the PAIR system to not being pulses in the airbox for noise and to keep them from...
yup, that's how it works. solid spacer is about 50x better than a stack of washers. Just gotta find/make it.
breaker bar with a 6' cheater pipe. Hope you have a good clutch or some other way to hold the engine.
From what I know of toyotas, it should.
Tighten them to about 90 ftlbs, then again in a hundred miles. Arm wrench isn't good enough when it's holding tires on.
Run it to the ignition, I don't know which wire. Otherwise someone could stick a clotheshanger in and operate the windows to get in.
Ever grease the ball joints, tie rods, etc? Grease things one at a time, (spray lube under the boot or around things that don't have zirks) and...
6k total over the trucks empty weight between the trailer, cargo, and stuff in the bed. Like I said the trailer had brakes and i never went over...
I do, it's installed on my truck. If this guy ever gets back to me about picking up a parts truck I'll have a whole extra truck minus the engine
changing the intake won't allow you to avoid emissions. If you are saying you don't have to worry about emissions testing and therefore want to...
I've seen some of what you're looking for, I've never been into that stuff so I never pay attention to who or where though. I have seen alarms...
Went to clean the koi pond. Found the previous occupants of the house had some leftover gravel from landscaping... [IMG] remarkably enough it's...
Yes, you'd need to put the worm gear on the output shaft, install the cable speedo head, speedo cable, and a cable speedo cluster. Oh, and then...
You're right, no reason not to as long as you have everything wired up that needs power. My little black box came out as the wiring inside was so...
As long as there is ANY oil pressure at idle, you're fine. Toyota specs 3 psi at idle for all of their older engines that I've seen (80s-early...
No, it was afternoon. timestamps messed up. 630am I'm driving to work. Put things in the right place and people with things to sell will see that...
Running with the wide dimension sideways defeats the purpose of having it. Might as well run square tube the same size as the small dimension....
The stock intake pipe necks down pretty small. Probably not a problem for stock engines but it'd get restrictive fast as you start to add mods....
yup, post in the right place, less sarcasm (can't promise none). I don't get the obsession with doing things on such a tiny screen then blaming it...
However the rest of the world not from the islands don't know how much they're worth so post a price or deal with whatever offers you get.
Separate names with a comma.
