Honestly, a simple gasket match and casting cleanup doesn't net much power. I've done it twice. More material would have to be removed in the...
What fuel starvation?
Does anyone have ideas on what combustion chamber mods are beneficial? Such as deburring or rounding off sharp corners? Or maybe unshrouding the...
Here's the thing.... (I think.) Porting the head will work with the factory EFI. There really isn't a way to flow more air that it can feed fuel...
Well, that's entirely up to you. The 22ret only makes a bit more power than the 22r.
Did it quiet down the compressor noise inside?
I don't believe so. Yes, it's a simple starting point for having a turbo setup, but I can guarantee that you'll have more money tied up into it...
Thanks! I'm working on it. I finished porting my new head last night. Should hopefully be the equivalent to LC's stage 5 port job now. Just...
Yes, I've only used their wheels, although an encoder wheel is an encoder wheel to some extent.
Everyone has elected to fabricate their own because of the added expense for me to do the work. I've been charging $125 for the labor and...
I'll need a 22re pulley/balancer, an oil pump, and a trigger wheel. I can supply them, or you can supply them. The oil pump needs modified to...
I'd be happy to. I've done 4 or 5 of them specifically for the 22re now. And many more for other vehicles.
I could make some if anyone is interested. They are fairly simple to make. Probably around $25 a set shipped for the bushings, and $45 a set if...
I also got my Injector Dynamics ID1000's to install soon. Things are about to get real.... Well, eventually they will get real. [IMG]
Pretty amazingly. My Flex-a-lite fan went bad on me. But I have a new Spal fan arriving today. I installed the caliper stands. They fit...
What info are you trying to determine?
I'm working on one, but haven't gotten to it yet. I'm making some big changes on my truck soon, which will include rear disks.
Yes Truckaction, those are the rotors I run. And looking at the 14's, I'm wondering if there's really going to be interest in them. They are...
These are for the 12.19" x 0.81" rotors. I don't have the dimensions on me anymore for the 4wd calipers, but I wouldn't be making them if they...
So, I finally got around to building my Wilwood caliper adapters for the rotors I'm running.... I'm going to do a production run if there is...
Separate names with a comma.
