Unless you need to do the butterflies and bearings doing it yourself wouldn't be bad. If the jets are already in the ballpark with info available...
I would guess a little head work and pistons. Sounds like it's reving pretty high. Other then that the Honda dizzy. Looking at the comments they...
Ran into this video of a 22re-t running hondata and making very good power. Funny that the shop is right down the street from me....
The pedal I ordered is already junk. Installed it and put a decent bit of tension for the return. I wear work boots most of the time so wanted...
Best part of work today was clearing out the bed. [ATTACH]
Made it to work today. Got insurance on her yesterday washed her up and messed with the carbs. Went decent but could still use alot of work....
How it's going running wise. Need to open up the carbs and go though it. Check the floats and a few other things. Dealing with my biggest battle...
Oh no I'm not that cool
Nice, looking I found something similar so went with it. Didn't think a new pedal could be so expensive. Been needing to do this. The rod style...
Been messing with it on and off for the rest of the day. Got it a little more dialed. The carbs are still being a little weird. Need to get the...
Made my first drive in like 2 years. Head seems to be holding. The linkage is binding so I need to take care of that. Might take it to work...
Found a 12 point to torque down the head. Put it under vacuum and it got full vacuum and held. Felt pretty good about it so filled it up. Just...
Decided to keep on working and mess with the motor. Pulled the head looking for any obvious leak. Didn't find anything. Was about to pill the...
Finally did some work on the truck. Did my tie rods, idle arm and pitman arm. Went pretty smooth. Used a press style remover on everything but the...
Might try bending it flat if you can get the slider to go farther forward. Cut the the rounded part right in the corner on the edges and reweld....
Not something I've run across for this generation. I've seen the upholstery available for later generations but I think most guys just get the...
Your wheel situation you might want to hit them up in the next month and ask again if nothing happens. I just delt with this with my custom...
Those mirrors are oem style. If you pull up the Japanese brochure you'll see those exact ones. Placement looks about spot on. To me like a lot of...
Those will be on the stiffer side. 250 from the wrecker is a little high but oem seats have a good bit more research and development into them....
Here's one of mine hitting limiter. [MEDIA]
Separate names with a comma.
