go GM 1 or 3 wire and never look back.. alternator for 80-100(100A) and bracket for 40, or make it. 15$ in random wires or fuse, distribution...
just to clarify, did you want it to be 4wd or 2wd? if you wanted it 2wd you could put the celica transmission in it, but like nook said if you...
Hmm..i see, on my 4x4 22r with weber i blocked off the vacuum ports on top, and it ties in to the heater tube below, i think. but as i have...
i have been searching like crazy :verdict_in: to find out what the coolant passage between the 2 and 3 ports is for? it has the vacuum piece on...
got more pictures here's some shots of when i did the brace/bracket and got it mounted, but before i adjusted the headlights and cut/bent the...
got the headlights.. still there, but mounted a bumper got an M3 bumper off one needing replaced at work.. and slapped it on there, had to take...
awesome,i will look at the diagrams and test if it is a negative output.. i was under the impression it was positive, which could be why it was...
I have a thread in the body section about putting in some jeep grand cherokee headlights, they are in, blah blah... time to wire them up. the...
i don't know what chemical components are in the factory paint job, but it was base coat clear coat on my 83's.. and a lot of them have been...
rubbing on surface with a rag soaked with laquer thinner can work, a little less aggressive would be paint reducer or thinner, i use laquer for...
tested and true battery, it had another one in with the issue before, haven't bench tested the alternator, but i did with the voltmeter as per...
alright, my truck runs only on the battery, it's a 22R in the trailblazer 4x4.. i have a new alternator, new external regulator, new-ish(definetly...
here's a link with just about all make and model wheel pattern, size and offset, etc. great for finding craigslist specials swapping....
sweet, just curious because i have seen a few 4runners converted to 2wd. and slammed. either way, kick ass.
are you keeping the trekker 4WD or going low? either way, nice to see a trekker getting customized.. i just got a toyota trailblazer and i wish...
heres another one http://jacksonville.craigslist.org/ctd/876721504.html must be a lot around here... updating another one.....
i have the fenders done minus an adjustment or two, no body work until i get the bumper made or on. fricken melted the headlight when i had a...
i'll try it again. [IMG] [IMG] [IMG] [IMG] Kick ass, it worked.. last time i left too much of the link and it didn't work. thanks
got one side in place i can't get pictures up here so i just stuck em on cardomain again. but i got the passenger side all the way cut out and...
here's some pictures of my headlight deal getting started.. if i can figure out how to post the pics..[IMG] [IMG] i know the garage is a mess..
Separate names with a comma.
